Install shiftlight on MY-00
#1
Install shiftlight on MY-00
Hello my English m8´s. Im Johan from Sweden. I´ve just bought my self a shiftlight for my MY-00 and I got a little problem installing it. There are 3 wires. Red(+12v), Black(Ground) and a Green(Sender). I wonder if you guys knows in what wire I should connect the Green wire in the Ecu?
Please help me with this. I´ve searched in this forum and found som threads for this but it was for MY-95.
Kind regards Johan from Sweden!
Please help me with this. I´ve searched in this forum and found som threads for this but it was for MY-95.
Kind regards Johan from Sweden!
#2
It's pin 30 on connector B134 according to Ravenswood. Pinouts for the connector are here. This is for a 2.5l Aussie car of course so YMMV. Check it out yourself, I'm no expert in these things.
Last edited by Chelspeed; 21 October 2006 at 04:40 PM.
#3
Dammit. Found this one ---> SSI Galleriet :: [780] Nano :: skanna on the swedish subaru forum. It "should" be to a My-00. I´ve look at three of theese schedules now with different results and im a bit confused . But i hope this one sholud be the right! Are t´here anyone here that can confirm this?
Cheers!
\Johan
Cheers!
\Johan
#4
The signal you want is the one that drives the rev counter. Can you check at the rev counter end and make sure the wire from the ECU which you think it is also goes to the rev counter?
Thread
Thread Starter
Forum
Replies
Last Post