Thanks John ! (PIAA Instructions)
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: on the B Roads..
Posts: 1,957
Likes: 0
Received 0 Likes
on
0 Posts
Thanks John ! (PIAA Instructions)
Received the fitting instructions for the PIAAs today, have lost your PM so could not reply..
They are all fitted and working well now, just need alligning.. (instructions will help with this)
Cheers, alex..
They are all fitted and working well now, just need alligning.. (instructions will help with this)
Cheers, alex..
#2
Scooby Regular
Originally Posted by 2000 sport
Received the fitting instructions for the PIAAs today, have lost your PM so could not reply..
They are all fitted and working well now, just need alligning.. (instructions will help with this)
Cheers, alex..
They are all fitted and working well now, just need alligning.. (instructions will help with this)
Cheers, alex..
Good luck with the alignment, it's a *** to do if you follow the instructions.
For those who don't know, the Prodrive PIAA kit replaces the fog lights with driving ones. The lights are very good but the lights mount onto a plate which fastens to the car using the standard bolts. This hides the lamp's own mounting bolt so to adjust it you (should):
- Fasten the lamp to the bracket finger tight.
- Bolt the bracket to the car.
- Move the light into alignment courtesy of the slack bolt.
- Remove the bracket and lamp, hoping the lamp doesn't move.
- Tighten the lamp mounting.
- Replace the bracket and lamp.
- Try the alignment and start again if it's not right.
The only alternative I've found is to remove the plastic wing shields to get at the lamp bolt under the arch. That's a bit easier - but not much.
#4
Scooby Regular
Join Date: Feb 2006
Location: Merseyside, UK.
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
John / Alex - I also have just bought a set of 2nd hand PIAAs for my MY99 UK Turbo, and being a bit of a Tech-novice, it looks a touch for me to attempt at the mo. Any chance of a copy of these instructions? Many thanks in advance. Dave.
#5
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: on the B Roads..
Posts: 1,957
Likes: 0
Received 0 Likes
on
0 Posts
hi mate,
try this.. http://www.chiark.co.uk/scooby/mod_piaa.asp
I wired mine into the std fog switch, so that I can choose to have them on or off with the full beam.. you will need an extra relay for this, if you struggle, drop me a PM, be happy to help..
try this.. http://www.chiark.co.uk/scooby/mod_piaa.asp
I wired mine into the std fog switch, so that I can choose to have them on or off with the full beam.. you will need an extra relay for this, if you struggle, drop me a PM, be happy to help..
Thread
Thread Starter
Forum
Replies
Last Post
Flat4x4-again
General Technical
2
29 September 2015 06:32 PM