Help, Beeping Indicator????????
#1
Unmapped 12.4s @ 105
Thread Starter
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
Help, Beeping Indicator????????
I've got an MY94 WRX and, before x-mas fitted some Sti rear lights. Looks well smart. Anyway, I havent driven my car since last Sunday, and all was fine then, but, now when I indicate right it beeps. I've had a look and it seems to me that it's the bulb holder thats beeping.
If i take the bulb out it beeps faster, as it would if the bulb had blown. Now it really doing my ******* head in.
Has this happened to anyone else, and if so, what can I do to make it stop? I don't think I can take it anymore, and if the left hand one starts doing it, I think I'll have a nervous breakdown.
Cheers in advance,
Micky
If i take the bulb out it beeps faster, as it would if the bulb had blown. Now it really doing my ******* head in.
Has this happened to anyone else, and if so, what can I do to make it stop? I don't think I can take it anymore, and if the left hand one starts doing it, I think I'll have a nervous breakdown.
Cheers in advance,
Micky
#2
Scooby Regular
iTrader: (2)
There is a certain type of flasher relay that emits a beeping noise. It's generally used when a towing electrics kit is fitted, and will emit a beep when the trailer flashers ARE working. It's a legal requirement, apprently in order for the driver of the vehicle towing the trailer to check his trailer indicators are in order, either audible or visual warning.
Could your vehicle ever have been fitted with a towbar? If so, changing the flasher relay back to a standard one, may do the trick.
Alcazar
Could your vehicle ever have been fitted with a towbar? If so, changing the flasher relay back to a standard one, may do the trick.
Alcazar
#3
Scooby Regular
Mickey from memory thats exactly what your problem is, haven't you gto a detachable tow bar or did??
have you changed any wiring or bulbs since you fitted?? sounds like it is seeing a bigger current draw than normal.................
alyn
have you changed any wiring or bulbs since you fitted?? sounds like it is seeing a bigger current draw than normal.................
alyn
#4
Unmapped 12.4s @ 105
Thread Starter
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
Cheers. Time to get the spanners out and undo the damage done by the previous owner. Tow bar + Scooby = NO
Thanks.
Micky.
Thanks.
Micky.
#5
Scooby Regular
iTrader: (2)
Originally Posted by mickywrx
Cheers. Time to get the spanners out and undo the damage done by the previous owner. Tow bar + Scooby = NO
Thanks.
Micky.
Thanks.
Micky.
Just remove the offending "towing" relay, and replace it with a standard one. Jobe done in 2 minutes!
Alcazar
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM