Driving Light Kit???
#1
Driving Light Kit???
I would like to ask were I can find a good a cheap Driving Ligth kit for a calssic shape Impreza, I only now the old ScoobySport Kit but now I do not know what at this moment are avaiable???
Regards
Regards
#3
Scooby Regular
iTrader: (2)
And as I said before, please try not to get "cheap" mixed up with "good" where driving lights are concerned:
Take into account:
1. Price, (of course)
2. Ease of installation
3. Ease of setting up and retaining settings
4. Ease of bulb change
5. Bulb life
6. Light output and spread.
7. Availability of upgraded bulbs
8. Quality of kit
9. Availability of spares, and finally
10. Are clear covers available, 'cos otherwise you'll bust one sooner or later?:
Alcazar
Take into account:
1. Price, (of course)
2. Ease of installation
3. Ease of setting up and retaining settings
4. Ease of bulb change
5. Bulb life
6. Light output and spread.
7. Availability of upgraded bulbs
8. Quality of kit
9. Availability of spares, and finally
10. Are clear covers available, 'cos otherwise you'll bust one sooner or later?:
Alcazar
#5
Originally Posted by ScoobyWhite
And the product that you advise is???
Regards
Regards
regards, Jan-egbert
#7
Scooby Regular
Only disappointment with the PIAA's is that the reflectors are prone to rusting. Also, no clear covers. Well you can fit std Subaru clear fog ones, but they aren't a perfect fit. So far my covers have stayed on and the lights haven't rusted yet.
Other than that they are very good. Expect to pay at least £50 if you smash one of them.
Other than that they are very good. Expect to pay at least £50 if you smash one of them.
Trending Topics
#8
Scooby Regular
iTrader: (2)
As regards the "rusting" thing: I had a Cibie Super Oscar do the same many years ago. The replacement lens, and the original unrusted one, I sealed at the rear with a layer of Waxoyl, and ran black sticky tape round the join between the reflector and the lamp housing, to keep water out of the housing.
Neither one rusted again.
Alcazar
Neither one rusted again.
Alcazar
#12
If it was P1 lights then it wasn't me.
I have got a set of Scoobysport HID Hella 1000FFF driving lights for sale though you were probably thinking of that. Was going to wait until September to advertise them as mid June doesn't seem the best time!!
They are very good but not cheap..... Would be looking for something like £300 a pair, complete with scoobysport clear covers, available with either drive or spotlight lens units, or one of each. If they're going on a blue Prodrive style MY02 STi then I've also got a pair of the appropriate subaru bumper covers with holes.
Bought for a MY01 bugeye WRX to replace the standard fogs, transferred to a MY02 STi but no longer useful to me as I've gone MY04 which has smaller fogs. I think they also fit classic shape cars in place of the fogs but someone would have to confirm that.
The best spotlights you can buy for a Subaru and no longer available new.
I have got a set of Scoobysport HID Hella 1000FFF driving lights for sale though you were probably thinking of that. Was going to wait until September to advertise them as mid June doesn't seem the best time!!
They are very good but not cheap..... Would be looking for something like £300 a pair, complete with scoobysport clear covers, available with either drive or spotlight lens units, or one of each. If they're going on a blue Prodrive style MY02 STi then I've also got a pair of the appropriate subaru bumper covers with holes.
Bought for a MY01 bugeye WRX to replace the standard fogs, transferred to a MY02 STi but no longer useful to me as I've gone MY04 which has smaller fogs. I think they also fit classic shape cars in place of the fogs but someone would have to confirm that.
The best spotlights you can buy for a Subaru and no longer available new.
#14
hella hid 1000ff
what is the difference between the scoobysport setup and the prodrive setup?
http://www.prodrive.com/default2.asp?M=247
Jan-egbert
#15
Scooby Regular
iTrader: (2)
Looking at that picture, it would seem not a lot of difference.
The Scoobysport set-up had their own brackets, which DID NOT use the standard pedastal mounting that the lights are supplied with, but had a triangular bracket with 3 bolt holes and a rectangular cut out in it, which, in turn, had the light unit fitted through and fixed in place with 4 screws.
The brackets were/are so well made that as soon as you bolted the lights into place, they were set up perfectly for throw (distance) and spread, (side to side).
On the Prodrive Halogen kit, the brackets used the single pedestal mount.
This gave rise to 3 problems:
1. Difficult initial set up.........the lights had to be REMOVED from the car to adjust throw etc, then replaced, tried out, removed again, tried out again, removed again etc, all in the dark as you can't see throw adjustments in daylight. A nightmare!
2. If/when bulb change became necessary, all adjustments would be lost and you'd be back to 1. above, again:
3. The single point fitting gave rise to vibration issues. (Strobe lighting effect), and poor bulb life.
Looking at the HID kit, there appear to be two extra brackets. If these are adjustment/steadying brackets, they WILL solve the above problems.
If they aren't, then personally, I'd stear clear:
The Scoobysport set-up had their own brackets, which DID NOT use the standard pedastal mounting that the lights are supplied with, but had a triangular bracket with 3 bolt holes and a rectangular cut out in it, which, in turn, had the light unit fitted through and fixed in place with 4 screws.
The brackets were/are so well made that as soon as you bolted the lights into place, they were set up perfectly for throw (distance) and spread, (side to side).
On the Prodrive Halogen kit, the brackets used the single pedestal mount.
This gave rise to 3 problems:
1. Difficult initial set up.........the lights had to be REMOVED from the car to adjust throw etc, then replaced, tried out, removed again, tried out again, removed again etc, all in the dark as you can't see throw adjustments in daylight. A nightmare!
2. If/when bulb change became necessary, all adjustments would be lost and you'd be back to 1. above, again:
3. The single point fitting gave rise to vibration issues. (Strobe lighting effect), and poor bulb life.
Looking at the HID kit, there appear to be two extra brackets. If these are adjustment/steadying brackets, they WILL solve the above problems.
If they aren't, then personally, I'd stear clear:
#16
see the light
Originally Posted by alcazar
On the Prodrive Halogen kit, the brackets used the single pedestal mount.
This gave rise to 3 problems:
1. Difficult initial set up.........the lights had to be REMOVED from the car to adjust throw etc, then replaced, tried out, removed again, tried out again, removed again etc, all in the dark as you can't see throw adjustments in daylight. A nightmare!
So you have to bend the bracket a little further to 45 degrees.
The hole in the bracket is to large, it was a nice thought by hella to align the light to use a large hole so you can adjust to several directions, and of course not the correct one.
I've solved this with a washer, this washer will fill the hole in the bracket.
So the only adjustment need to align this light is to turn it between left and right until it shines straight
Easy.
Originally Posted by alcazar
2. If/when bulb change became necessary, all adjustments would be lost and you'd be back to 1. above, again:
Originally Posted by alcazar
3. The single point fitting gave rise to vibration issues. (Strobe lighting effect), and poor bulb life.
Originally Posted by alcazar
Looking at the HID kit, there appear to be two extra brackets. If these are adjustment/steadying brackets, they WILL solve the above problems.
If they aren't, then personally, I'd stear clear:
If they aren't, then personally, I'd stear clear:
Regards, Jan-egbert
Still seeing light in the darkness with hella's, after having a lot of trouble with the cibies.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM