Notices

Legacy Owners - Help!

Thread Tools
 
Search this Thread
 
Old 05 April 2004, 09:35 PM
  #1  
B4 Alan
Scooby Regular
Thread Starter
 
B4 Alan's Avatar
 
Join Date: Mar 2004
Location: Dublin, Ireland
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Default Legacy Owners - Help!

I think I've got to the problem of my ABS light coming on - seems to be a problem with my reverse lights. The bulbs/fuses are fine but the lights are not working and as soon as I select reverse the ABS light comes on? If I take one bulb out - the other one will work and the ABS light will not come on? I also notice that when the brake lights come on, the tail lights in the boot go off - is that normal? I recently had to get some holes from a previous spoiler welded up - could this have caused an earthing problem. It has only happened since I got this done so I'm thinking it has something to do with it.

Any ideas appreciated!

Alan.
Old 06 April 2004, 01:49 PM
  #2  
GTB Limited
Scooby Regular
 
GTB Limited's Avatar
 
Join Date: Jun 2002
Location: Rochester
Posts: 886
Likes: 0
Received 1 Like on 1 Post
Default

Alan,

Check all your earths (where) possible.

I'm hoping you disconnected the battery before welding?


Mark
UK Twin Turbo Legacy Register
Old 06 April 2004, 02:09 PM
  #3  
B4 Alan
Scooby Regular
Thread Starter
 
B4 Alan's Avatar
 
Join Date: Mar 2004
Location: Dublin, Ireland
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by GTB Limited
I'm hoping you disconnected the battery before welding?

Mark
UK Twin Turbo Legacy Register
Sure did

What earths would be most likely to be affected?

Thanks.
Alan.
Old 06 April 2004, 02:15 PM
  #4  
GTB Limited
Scooby Regular
 
GTB Limited's Avatar
 
Join Date: Jun 2002
Location: Rochester
Posts: 886
Likes: 0
Received 1 Like on 1 Post
Default

Check the rear earths, plus any under the dash.

Mark
Old 07 April 2004, 12:47 PM
  #5  
B4 Alan
Scooby Regular
Thread Starter
 
B4 Alan's Avatar
 
Join Date: Mar 2004
Location: Dublin, Ireland
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Default

Cheers - I seem to have sorted it out

Is it normal for the brake lights on the back (not boot) to only come on when you have your driving lights on (and the tail lights in the boot to go off), but when you don't have any lights on the brake lights at the back and in the boot lid come on?
Hope that makes sense

Alan.
Old 07 April 2004, 02:37 PM
  #6  
GTB Limited
Scooby Regular
 
GTB Limited's Avatar
 
Join Date: Jun 2002
Location: Rochester
Posts: 886
Likes: 0
Received 1 Like on 1 Post
Default



Think I get it.

All brake lights should come on (when pressing pedal ) , with either side lights on or off.


Mark
Old 09 April 2004, 03:22 AM
  #7  
AJbaseBloke
Scooby Regular
 
AJbaseBloke's Avatar
 
Join Date: Oct 2001
Posts: 1,260
Likes: 0
Received 0 Likes on 0 Posts
Default

Erm, I think I understand, but just for clarity (confusion? ) on my B4 things go like: 1. Side lights (ie half bright on boot and rear quarters): on when fog lights selected and/or side lights selected
*also the nifty "park light" button on the steering wheel hub can turn them on*

2. Brake lights (ie full bright) on boot and rear quarters + high mount when pedal is pressed.

HTH
Old 13 April 2004, 09:38 AM
  #8  
B4 Alan
Scooby Regular
Thread Starter
 
B4 Alan's Avatar
 
Join Date: Mar 2004
Location: Dublin, Ireland
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks - it's hard to explain in writing!

I've been looking at the car at the weekend and have figured out the following:

Side lights off:
1) The brake lights work fine.
2) The reverse lights work fine.
Side lights on:
1) The brakelights only work on the rear quarters and the the side lights in the boot turn off.
2) The reverse light will work but when the brake pedal is pushed the reverse light will turn off and then on when the pedal is released.

I've also noticed that the licence plate lights are not working at all. I have changed all the bulbs (brake/side, reverse, licence) but it still remains the same. I have looked at the fuses and everything looks fine but I'm not sure as I don't know which fuse is for what as the manual is in Japanese
Does anyone have the fuse diagaram or can tell me what fuses are for what?

I had a look at all the wiring leading to each light and everthing 'looks' fine.
All this has only happened since I got some holes in my boot welded (battery was disconnected). I'm thinking the heat may have damaged a fuse or something?

Any more ideas?

Thanks.
Alan.

Originally Posted by AJbaseBloke
Erm, I think I understand, but just for clarity (confusion? ) on my B4 things go like: 1. Side lights (ie half bright on boot and rear quarters): on when fog lights selected and/or side lights selected
*also the nifty "park light" button on the steering wheel hub can turn them on*

2. Brake lights (ie full bright) on boot and rear quarters + high mount when pedal is pressed.

HTH
Old 14 April 2004, 08:26 AM
  #9  
GTB Limited
Scooby Regular
 
GTB Limited's Avatar
 
Join Date: Jun 2002
Location: Rochester
Posts: 886
Likes: 0
Received 1 Like on 1 Post
Default

Wiring diagrams are on my website.

UK Twin Turbo Legacy Register


Sounds to me you've got a short some where.

Mark
Old 14 April 2004, 10:13 AM
  #10  
B4 Alan
Scooby Regular
Thread Starter
 
B4 Alan's Avatar
 
Join Date: Mar 2004
Location: Dublin, Ireland
Posts: 56
Likes: 0
Received 0 Likes on 0 Posts
Default

Cheers!

Some very helpful info. on your site - Thanks.

Alan.

Originally Posted by GTB Limited
Wiring diagrams are on my website.

UK Twin Turbo Legacy Register


Sounds to me you've got a short some where.

Mark
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
04 November 2021 07:12 PM
Abx
Subaru
22
09 January 2016 05:42 PM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM
InTurbo
ScoobyNet General
21
30 September 2015 08:59 PM
mmcw
Computer & Technology Related
1
25 September 2015 10:18 PM



Quick Reply: Legacy Owners - Help!



All times are GMT +1. The time now is 11:18 PM.