momo airbag steering wheels advice please
#1
Ive just bought a sti v4 momo steering wheel and the connections on the back of the airbag are different? still, 2 wires but different connector...im wanting to know if the wiring is different in any way from MY95 to MY97-98.
darren
darren
#4
Try doing a search first.I know there is one because I found it when I did my (my95 to sti v5) steering wheel, also had no problems with the airbag light going out,but I think you will need the clock spinner that matches the steering wheel, I did.
When doing the job just remember to disconect the battery for about an hour BEFORE you start and be brave?
When doing the job just remember to disconect the battery for about an hour BEFORE you start and be brave?
#5
I did this the wires are different colours but orientation is not important. Like said above leave battery disconnected for an hour or so and then stamp on the brake pedal a few times first to make 100% sure. I cut the connector of my old wheel and soldered onto the new one.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM