bugeye rh indicator stays on *HELP*
#1
Scooby Newbie
Thread Starter
Join Date: Nov 2014
Location: London
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
bugeye rh indicator stays on *HELP*
After getting over the initial "oh crap my lights won't turn off" while leaving the parking light switch on my column left on :loll: I'm left with another annoying problem!
when i arm/disarm my alarm the RH indicator stays on!
With abit of arming/disarming i can get it to stay off but its a very frustrating problem!
would happily remove it completely if necessary if theres any knowledge here on how to do that!
when i arm/disarm my alarm the RH indicator stays on!
With abit of arming/disarming i can get it to stay off but its a very frustrating problem!
would happily remove it completely if necessary if theres any knowledge here on how to do that!
Last edited by WRLondon; 16 November 2014 at 03:53 PM.
#5
Scooby Newbie
Thread Starter
Join Date: Nov 2014
Location: London
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
its a blue one Haha
Ill figure it out and post a fix so anyone looking can find it
as far as i can tell there are 3 fixes
1. replacement alarm (same one or aftermarket)
2. remove the indicator take off from the loom by following wires
3. locating and repairing/replacing the sticky relay
its too cold & rainy to **** about at the moment so waiting for a dry day!
Ill figure it out and post a fix so anyone looking can find it
as far as i can tell there are 3 fixes
1. replacement alarm (same one or aftermarket)
2. remove the indicator take off from the loom by following wires
3. locating and repairing/replacing the sticky relay
its too cold & rainy to **** about at the moment so waiting for a dry day!
Thread
Thread Starter
Forum
Replies
Last Post