Blob eye or Hawkeye STI
#2
Scooby Regular
iTrader: (4)
Join Date: Apr 2005
Location: Co. Down, Northern Ireland
Posts: 562
Likes: 0
Received 1 Like
on
1 Post
general rule of thumb would be best you can afford, low mile hawk
unless of course you particularly want a certain shape, then the cleanest lowest mile example of ur chosen shape, that is within ur budget.
i dont think there is much diffenece in the driving experience of a blob or hawk, so relly its just gonna be down to what you want/can afford.
unless of course you particularly want a certain shape, then the cleanest lowest mile example of ur chosen shape, that is within ur budget.
i dont think there is much diffenece in the driving experience of a blob or hawk, so relly its just gonna be down to what you want/can afford.
#4
Scooby Regular
Trending Topics
#9
Scooby Regular
Thread Starter
Join Date: Sep 2011
Location: Northern Ireland
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the replies, Budget of about 10K so open to either. A bit of a mixed reaction on model choice. In N. Ireland what is the tax band difference of 2.0 against 2.5
#11
Scooby Regular
iTrader: (23)
I know the UK is roughly £240 for pre 2006 and £400 for anything after but not sure of the exact cut off date for registration, Your gonna be paying roughly £150 a year more depending on which one you decide on, If this applies in NI i dont know though, lol.
Get a JDM instead, My Spec-C is cheaper to tax than our Saab 1.9 TDI Sport, Only by £20 a year but i know what i prefer to drive.
Get a JDM instead, My Spec-C is cheaper to tax than our Saab 1.9 TDI Sport, Only by £20 a year but i know what i prefer to drive.
#14
Difficult really, i was in teh same boat and decided to go for a blob eye with the wider track, mainly due to the tax.
I do prefer the front end of a hawkeye so i may get my front end hawked up in the future
Ive heard the 2.5's can be quite unreliable but how true this is im not sure.
I do prefer the front end of a hawkeye so i may get my front end hawked up in the future
Ive heard the 2.5's can be quite unreliable but how true this is im not sure.
#15
Scooby Regular
iTrader: (3)
Join Date: Jan 2004
Location: Carrick
Posts: 977
Likes: 0
Received 0 Likes
on
0 Posts
Think it's pre March 06 for the lower tax bracket......
Biased opinion, but the wide track Blob STI with DCCD seems to be popular ....only slight niggle is they changed the wheel PCD, thus making all previous 5 x 100 rims unsuitable for the newer PCD of 5 x 114.3...slightly limits choise in 2nd hand sets of Subaru alloys, but does open the Honda/Evo fitment option
Biased opinion, but the wide track Blob STI with DCCD seems to be popular ....only slight niggle is they changed the wheel PCD, thus making all previous 5 x 100 rims unsuitable for the newer PCD of 5 x 114.3...slightly limits choise in 2nd hand sets of Subaru alloys, but does open the Honda/Evo fitment option
#17
I got a late 05 blob last January, widetrack and one of the last of the 2.0 litre engines....love the car to bits and its a great all rounder tbh, i just still have an inkling for a white hawkeye sti, only thing slightly worrying is the higher tax again and the 2.5 engine which can give trouble, but sure you can get a bad model of any car and whatever will be will be lol
They're both great cars tho, and such great value for money....i have a set of coilovers in my blob and i could still get into it and drive to Cork without even a second thought
They're both great cars tho, and such great value for money....i have a set of coilovers in my blob and i could still get into it and drive to Cork without even a second thought
#18
Scooby Regular
Thread Starter
Join Date: Sep 2011
Location: Northern Ireland
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Seen a white STI hawkeye at Moyway motors a few weeks ago, looking big money for it though. 05 or Hawkeye would be my preference so far.
#24
Scooby Regular
iTrader: (18)
No, just their chocolate std pistons!!!
But saying that an ideal setup upto 450bhp (on std open deck 2.5 litre block) would be to drop in uprated forged pistons into a 2.5 litre block, just as you have done. This would give the best of both worlds: Stronger engine internals & with greater torque than 2.0 litre due to it being a 2.5 litre.
But saying that an ideal setup upto 450bhp (on std open deck 2.5 litre block) would be to drop in uprated forged pistons into a 2.5 litre block, just as you have done. This would give the best of both worlds: Stronger engine internals & with greater torque than 2.0 litre due to it being a 2.5 litre.
Last edited by rickya; 18 January 2012 at 02:02 PM.
#25
Scooby Regular
iTrader: (3)
Join Date: Dec 2008
Location: London
Posts: 1,778
Likes: 0
Received 0 Likes
on
0 Posts
No, just their chocolate std pistons!!!
But saying that an ideal setup upto 450bhp (on std open deck 2.5 litre block) would be to drop in uprated forged pistons into a 2.5 litre block, just as you have done. This would give the best of both worlds: Stronger engine internals & with greater torque than 2.0 litre due to it being a 2.5 litre.
But saying that an ideal setup upto 450bhp (on std open deck 2.5 litre block) would be to drop in uprated forged pistons into a 2.5 litre block, just as you have done. This would give the best of both worlds: Stronger engine internals & with greater torque than 2.0 litre due to it being a 2.5 litre.
#29
The DCCD refers to the driver controlled centre differential. Basically it allows you to move power between the front and rear axles.
The centre diff uses a series of electomagnetically controlled clutch plates to control the amount of slip.
Using the in-car dial you can go from open centre diff like on a non DCCD car which splits the power 35/65% front to rear (I think that is the correct figure for the MY05 cars with the MY06 onwards being 41/59%) with the dial at the rearmost setting to a 50/50% lock which will make both axels turn together at exactly the same speed.
If a car has this then next to the handbrake you will have a dial and a rocker switch which allows you to switch between automatic and manual control.
As for being a wide track car this refers to the distance left to right between the wheels being wider. Essentially the wheelbase is wider than the older STIs. Im not sure how you would check this if you are looking at the car without a reference point but I think its a fair assumption that a Blob STI on a 55 plate will be a wide track model. Im sure someone will correct me if thats incorrect.
The centre diff uses a series of electomagnetically controlled clutch plates to control the amount of slip.
Using the in-car dial you can go from open centre diff like on a non DCCD car which splits the power 35/65% front to rear (I think that is the correct figure for the MY05 cars with the MY06 onwards being 41/59%) with the dial at the rearmost setting to a 50/50% lock which will make both axels turn together at exactly the same speed.
If a car has this then next to the handbrake you will have a dial and a rocker switch which allows you to switch between automatic and manual control.
As for being a wide track car this refers to the distance left to right between the wheels being wider. Essentially the wheelbase is wider than the older STIs. Im not sure how you would check this if you are looking at the car without a reference point but I think its a fair assumption that a Blob STI on a 55 plate will be a wide track model. Im sure someone will correct me if thats incorrect.