Blobeye Radio removal
#2
Scooby Regular
Join Date: Oct 2005
Location: West London
Posts: 1,914
Likes: 0
Received 0 Likes
on
0 Posts
If you pull out the cupholder you'll see a couple of screws, take these out.
The fascia around the radio just pulls out, the radio itself is held on with 6 screws.
The fascia around the radio just pulls out, the radio itself is held on with 6 screws.
Last edited by bugeyeandy; 19 April 2009 at 06:26 PM.
#3
Scooby Regular
Join Date: Oct 2005
Location: West London
Posts: 1,914
Likes: 0
Received 0 Likes
on
0 Posts
#5
Scooby Regular
iTrader: (2)
Join Date: Apr 2002
Location: Buckinghamshire
Posts: 1,818
Likes: 0
Received 0 Likes
on
0 Posts
Forrester pocket is the norm, I've got a blanking plate from the US that says Subaru on it and matches the colour of the dash. I think US cars don't have a radio fitted as standard?
#6
Bubbaroo - I have one of the pockets that AndyMoody has mentioned - it's a propper Subaru item which I used on my Blob when converting to single din - its sitting in my garrage doing nought. PM me if you want it.
#7
Scooby Regular
iTrader: (1)
Join Date: Mar 2008
Location: Northants
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
yep the forester pocket is the best thing to put in the space but it takes a bid of playing about with to get everything lined up right for fitting. my friend and i took loads of measurements to get mine right, if you know someone local who has done the conversion would be good to see if you could look at theirs to get all the measurments etc.
Trending Topics
#8
Mine is a propper Subaru item, not sure if it is for Impreza or Forester, got the number a long time ago from the inter-net, but it fits perfectly into the gap left, using 2 screws on either side through the metal frame that the stereo was fitted to. It certainly didn't involve any 'playing about' with that others seem to be experiencing????
The only number on it is PP-TD20
The only number on it is PP-TD20
#9
Update - just been googling and it seems there are 2 different types of pocket - one has a siver flap over it and the one I have which is just a black plastc storage compartment.
Part # 66128SA000 - with a silver flap, or
Part # 66128AE000 - a basic black pocket
Hope this clears it up!!!
Part # 66128SA000 - with a silver flap, or
Part # 66128AE000 - a basic black pocket
Hope this clears it up!!!
#10
Scooby Regular
iTrader: (1)
Join Date: Mar 2008
Location: Northants
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
The forester one is the plastic flap one. You have to remove the two metal plates from the side of the original head unit and attach these plates to the side of the single din pocket and you also have to attach the headunit aswell AND it has to be all lined up right so everything sits flush when installed( if you go for the forester pocket you no longer need the plastic surround on your single din head unit.
Pic when done....
HTH
Pic when done....
HTH
Thread
Thread Starter
Forum
Replies
Last Post