Anyone know what I should be expecting on a P1?

I've so far got:-

max boost = 1.35 kpa?
max oil pre = 7 kpa?
max oil temp = 94 degrees C

Does this sound ok? Also what do you suggest I set the warnings at?

 

1.35 bar....that's a bit high innit?

Oil Pressure at 7 bar...bit depends on whether that's a just started car up reading or that oil has been fully warmed up and grade of oil used I think.

94 degrees on Temp is normal.

For comparison...on a Std MY03 STI I get

1.4bar max boost stablising at 1.1bar

Oil Pressure is around 7bar when cold, settling at 6bar when warmed up. Am using 10w50

Oil temp ranges between 85 and 100 degrees depending how car is being driven.

 

I'll get a better reading from longer drive I guess, this was a first time thrash up dual carriage way and back. Also noticed 3rd to 4th gear lighting up the knocklink just fitted. Only time though.