jredf

I am an amatuer car tinkerer.. I just purchased the gauge and am unclear as to exactly what I should be attaching where!!

I am supposed to attach the defi t-bar in the hose between the fuel regulator and the surge tank. can someone please post the actual pics of these a sthere are three hoses in that area and I don't want to splice into the wrong one!! I just want to confirm it.. Thanks!!

jredf

purchased a boost gauge.. I think I forgot to mention that!!

alcazar

iTrader: (2)

I have their white faced gauges, and didn't use tyhe T piece at all. I identified the cover to a seperate boost gauge "port" which was on the front passenger side of the inlet manifold, covered with a black rubber cover, about 30mm long with a flattened end. Pull it off, and push the hose for the boost gauge on here.
Alcazar

care3

this is for>96

for 96< check http://www.chiark.com/scooby/

jredf

Awesom pic!! Thanks!! I placed it today.. I didn't have any spare slots to place it so I had to use the T.. Maybe the Japanese versions are different... Now I just have to save the moola to purchase the other two gauges!! My gauges can be seen here ---> http://www.defi-shop.com/product/dl/bf/bf_top.htm
and are REALLY nice.. Just to bright compared to my dash now.. Well worth the money though!! Thanks again!!

BAH

Have a look at my projects page for a DIY defi install....

Site in my profile..