Subaru MOMO Type S shift knob?
07 August 2002, 06:37 AM
#1
Scooby Newbie
Thread Starter
Join Date: Jul 2001
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Check out this ****. http://a1.cpimg.com/image/87/E3/10196871-0602-020001DA-.jpg
It's supposed to be from a JDM forester. Any here seen it before? The MOMO emblem is a perfect match for the JDM STi steering wheel. I ordered this **** but it came with the regular black MOMO emblem so I sent it back. If you have some info, especially part #'s please post here or e-mail me at rfvibar@hotmail.com Thank you very much.
It's supposed to be from a JDM forester. Any here seen it before? The MOMO emblem is a perfect match for the JDM STi steering wheel. I ordered this **** but it came with the regular black MOMO emblem so I sent it back. If you have some info, especially part #'s please post here or e-mail me at rfvibar@hotmail.com Thank you very much.
08 August 2002, 10:18 PM
#2
Scooby Regular
Join Date: May 2002
Location: Scotland
Posts: 2,148
Likes: 0
Received 0 Likes
on
0 Posts
?
11 August 2002, 03:09 AM
#4
Scooby Regular
Looks like a "Race Air Leather Aluminum" to me.
#14 on this page http://www.passionmotorsport.co.uk/solegearmenu9.htm
You can get them from SPS and Sports Car Parts which are a bit closer to you.
Stefan
#14 on this page http://www.passionmotorsport.co.uk/solegearmenu9.htm
You can get them from SPS and Sports Car Parts which are a bit closer to you.
Stefan
12 August 2002, 04:26 AM
#5
Scooby Newbie
Thread Starter
Join Date: Jul 2001
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Stefan,
It's a MOMO Race Airleather Aluminum Type S which has a wider base than the regular Race Airleather. In addition, this **** is a screw-on replacement for the original factory ****; it doesn't use set screws like most MOMO *****. Plus, the base is machined to hold up the OEM boot. It is offered as an option on Foresters. You can see it at www.subaru.co.jp. Just go to the "3D Customize" link.
It's a MOMO Race Airleather Aluminum Type S which has a wider base than the regular Race Airleather. In addition, this **** is a screw-on replacement for the original factory ****; it doesn't use set screws like most MOMO *****. Plus, the base is machined to hold up the OEM boot. It is offered as an option on Foresters. You can see it at www.subaru.co.jp. Just go to the "3D Customize" link.
12 August 2002, 12:15 PM
#7
Scooby Regular
Sorry m8, didn't realise. Can't any scooby Dealers in the states send you an accessories catalogue for the Forrester? Should have all the part#'s for both types. Sorry I can't be of more use 
SB,
The surround looks like either a Nitosport one or a Motion Styling job.
Stefan
SB,
The surround looks like either a Nitosport one or a Motion Styling job.
Stefan
Trending Topics
13 August 2002, 03:24 AM
#9
Scooby Newbie
Thread Starter
Join Date: Jul 2001
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Stefan,
I actually did receive the **** from a local dealer for $140!!! The emblem didn't match the one in the picture (it was black instead of silver). It seems that the **** in the picture may have been produced for show cars only. The only one that Subaru sells is the one with the black MOMO emblem. The gear surround looks like the STi one for the WRX (it's sold here in the US for about $90).
I actually did receive the **** from a local dealer for $140!!! The emblem didn't match the one in the picture (it was black instead of silver). It seems that the **** in the picture may have been produced for show cars only. The only one that Subaru sells is the one with the black MOMO emblem. The gear surround looks like the STi one for the WRX (it's sold here in the US for about $90).
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM