Anyone had a steering wheel retrimmed?
#1
Anyone had a steering wheel retrimmed?
Looking for recommendations, or places to avoid.
PM me anything that might cause probs.
Found one that would change my round wheel into a flat bottomed one, and make it thicker too. It eas on YouTube.
Present wheel is off a WR1, fitted to a 98 classic.
PM me anything that might cause probs.
Found one that would change my round wheel into a flat bottomed one, and make it thicker too. It eas on YouTube.
Present wheel is off a WR1, fitted to a 98 classic.
The following users liked this post:
The following users liked this post:
#4
Scooby Regular
iv just had 3 done at the same time ,they have done around 10 for me now , the place is called edge automotive interiors ,, bloody excellent job every time
tried royal steering wheels and won't be giving them my work ever again
tried royal steering wheels and won't be giving them my work ever again
The following users liked this post:
The following 2 users liked this post by domino46:
The following users liked this post:
Trending Topics
#9
Scooby Regular
not sure mate ,, I would like to say most likely as they are a big company that does lots of very high end cars but iv not asked the question myself so you will have to contact them and ask the question
feel free to name drop me lol (Steve davies)
07817 324 324
sales@edgeautomotive.co.uk
www.edgeautomotive.co.uk
The following users liked this post:
#11
Scooby Regular
iTrader: (20)
not sure mate ,, I would like to say most likely as they are a big company that does lots of very high end cars but iv not asked the question myself so you will have to contact them and ask the question
feel free to name drop me lol (Steve davies)
07817 324 324
sales@edgeautomotive.co.uk
www.edgeautomotive.co.uk
feel free to name drop me lol (Steve davies)
07817 324 324
sales@edgeautomotive.co.uk
www.edgeautomotive.co.uk
The following users liked this post:
#14
Scooby Regular
Been looking into this myself and found various threads about Royals, they seem to be crazy busy all the time, a bit like they cannot keep up with the demand. Just my 2p worth.
#15
Scooby Regular
thats fine if they are but not replying to emails to tell customers they are busy is just rude in my view ,, takes 2 mins to copy and paste the same reply to anyone you couldn't do work for ,,, not like its one or two wheels they would be doing for me as iv had loads done so its there loss not mine
#19
Scooby Regular
iTrader: (1)
[QUOTE=lockheed;12115215]Here are some pics the stripe is at 11.58 and not 12.00, the stiching is inconsistent, they wouldnt answer my calls after sending my steering wheel somewhere else, honestly i thought they closed up shop, i even started a thread on here about it
Not good mate!
Not good mate!
The following 2 users liked this post by lockheed:
#22
Scooby Regular
thats the trouble isnt it ,, when a company is overwhelmed with orders (prob due to the Facebook promotors lol) then they either rush to get them done or employ people who dont have the same attention to detail as the current people so the work suffers
had about 10+ steering wheels done at edge automotive and all mine have been good and I know prob another 20 people who have used them off my recommendation and they have all been over the moon with them aswell so it sometimes pays to find your own company rather than following the crowd lol
had about 10+ steering wheels done at edge automotive and all mine have been good and I know prob another 20 people who have used them off my recommendation and they have all been over the moon with them aswell so it sometimes pays to find your own company rather than following the crowd lol
The following 3 users liked this post by domino46:
The following users liked this post:
The following users liked this post:
The following users liked this post:
#26
I had my fsti wheel re trimmed by Royal in alcantera the first time they got it completely wrong and did it in perferated leather then made me wait while they sorted it out. The communication or lack of it was bloody awful . Though to be fair the end result was great , but if my experience was anything to go by be prepared to wait and be prepared to be ignored.
The following users liked this post:
#27
Moderator
iTrader: (1)
Don't mind me lurking; I've got a well worn second hand steering wheel on my R32 which I purchased to get the multifunction buttons. Sadly the buttons won't transfer to my original wheel, so looks like I'm going to need the wheel re-trimmed.
So very interested in how all you guys get on.
The following users liked this post:
#28
Scooby Regular
iTrader: (1)
Don't mind me lurking; I've got a well worn second hand steering wheel on my R32 which I purchased to get the multifunction buttons. Sadly the buttons won't transfer to my original wheel, so looks like I'm going to need the wheel re-trimmed.
So very interested in how all you guys get on.
So very interested in how all you guys get on.
Its getting posted to Royal wheels in the morning as they are the only company that replied and they did a good job of the wheel on my car so fingers crossed they do a good job on his one!
will put some pics up when it's back.
#29
Scooby Regular
iTrader: (1)
His is a mk4 R32 wheel so doesnt have any buttons.
Its getting posted to Royal wheels in the morning as they are the only company that replied and they did a good job of the wheel on my car so fingers crossed they do a good job on his one!
will put some pics up when it's back.
Its getting posted to Royal wheels in the morning as they are the only company that replied and they did a good job of the wheel on my car so fingers crossed they do a good job on his one!
will put some pics up when it's back.
Hope yours and yours come back better than mine.,🤣