Hawkwind

Can anyone point me in the right direction where i can buy some 6x9 adaptors for the rear shelf please.

Thanks. J

alcazar

iTrader: (2)

I made my own from 18mm mdf, cut out the speaker opening using the template supplied with the speakers, then cut them into lozenge shapes around the opening, covered the whole lot with proper black shelf-type material from an ICE dealer and bolted the speakers down through the adpators using M4 x 50mm stainless capscrews.

Total cost was under £4.

JonMc

iTrader: (51)

I remodelled my rear shelf to incorporate mine, a little bit more expensive that Alcazar because I foam-backed the shelf to reduce vibrations/reverberation and covered it in alcantara, but pretty much the same effect

Never seen adaptors as such