Classic - wot size r speakers
#1
Classic - wot size r speakers
Im thinking about upgrading the speakers (front and rear) in my classic wagon cos their bloomin awful, can someone tell me what size they are so that i can use direct replacements (obviously better ones)
#4
about 6 to 6.5 inch in front. I've got infinity 6010cs's in the front. These are component speakers and I found you can re use the std mounting ring for the main woofer which makes installtion a piece of pi$$ and it gets behind the door card. If you have the door handles surrounds wiht the inegrated tweeter 'mesh' you can mount the tweeter behind this for a stealth install.
5.25 inch at rear I recall. I upgraded mine with infinity kappa 52.7i. The rear kappas have a deeper mounting than the std speakers, so i had to enalrge the hole in the door allow the frame to mount, but other than that (5-10min / door with a £3 small blade hacksaw and a steel file.) they are a sweet fit.
I also recommend an alpine SWD1600 under seat sub. Out of sight and provides great sound without compromising your boot area.
Sound quality is a significant improvement over standard, great detail, but of course you can spend more and get better. Good luck, can assist with install tips if needed, just PM.
5.25 inch at rear I recall. I upgraded mine with infinity kappa 52.7i. The rear kappas have a deeper mounting than the std speakers, so i had to enalrge the hole in the door allow the frame to mount, but other than that (5-10min / door with a £3 small blade hacksaw and a steel file.) they are a sweet fit.
I also recommend an alpine SWD1600 under seat sub. Out of sight and provides great sound without compromising your boot area.
Sound quality is a significant improvement over standard, great detail, but of course you can spend more and get better. Good luck, can assist with install tips if needed, just PM.
Thread
Thread Starter
Forum
Replies
Last Post