Sub install.... getting to the battery?
#1
Scooby Regular
Thread Starter
Join Date: Mar 2007
Location: Swindon
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Sub install.... getting to the battery?
So whats everyone done here when they want to get to the battery on a '99 Classic?
Any particular side to run the wires down?
Thanks in advance!
Any particular side to run the wires down?
Thanks in advance!
#2
Scooby Regular
Join Date: Jul 2006
Location: Playing the Loudest PS2 in my car
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
Try and keep the wires on the same side as the battery and go through the firewall with it.
I'm guessing there's an amp or two going in there!!
Just keep the wiring runs as short as reasonably possible and make sure it's earthed well.
Mines a bit newer than yours but view my scooby and you get the jist of what can be done.
Dave
I'm guessing there's an amp or two going in there!!
Just keep the wiring runs as short as reasonably possible and make sure it's earthed well.
Mines a bit newer than yours but view my scooby and you get the jist of what can be done.
Dave
#3
Scooby Regular
Thread Starter
Join Date: Mar 2007
Location: Swindon
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Just a simple Vibe Active going in
Where exactly is it on the passenger side, I assume under the glove box somewhere? I will have to have a look tomorrow.
Where exactly is it on the passenger side, I assume under the glove box somewhere? I will have to have a look tomorrow.
#4
Scooby Regular
I've put my live off the battery to the amps in the boot through where the air-con pipes go through, just made a extra hole in the grommet...
You'll have to lift the carpet and sound deadening to get the wire through...
Run the wire all the way down the n/s...
You'll have to lift the carpet and sound deadening to get the wire through...
Run the wire all the way down the n/s...
#5
Scooby Regular
iTrader: (2)
^^^^
What he said
If no aircon, there's an unused grommet there,( about 50 mm oval) or make a hole through the grommet used FOR the aircon. It comes out high above the glovebox, poke a stiff wire through from the bonnet side to help you find the wire when it comes through Finding it from the INSIDE is best done by FEEL, it's hard to see.
then remove trim panels from along inside the footwell: prise out clips and undo screws, it's a piece of cake. There's a fair bit of room.
Remove rear seat base, (two bolts) for easier access.
Alcazar
What he said
If no aircon, there's an unused grommet there,( about 50 mm oval) or make a hole through the grommet used FOR the aircon. It comes out high above the glovebox, poke a stiff wire through from the bonnet side to help you find the wire when it comes through Finding it from the INSIDE is best done by FEEL, it's hard to see.
then remove trim panels from along inside the footwell: prise out clips and undo screws, it's a piece of cake. There's a fair bit of room.
Remove rear seat base, (two bolts) for easier access.
Alcazar
#7
Scooby Regular
Thread Starter
Join Date: Mar 2007
Location: Swindon
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
bump.
struggling with this :S cant see **** all.
would love to know where to go pleaaaaaaaaaase!
Edit: Sorted just couldnt find that bit from the inside
Now I cant find a place to earth lol, argh.
struggling with this :S cant see **** all.
would love to know where to go pleaaaaaaaaaase!
Edit: Sorted just couldnt find that bit from the inside
Now I cant find a place to earth lol, argh.
Last edited by Johno83; 14 July 2007 at 05:51 PM.
Trending Topics
#9
Scooby Regular
Thread
Thread Starter
Forum
Replies
Last Post