What do I need to fit Infinity comps into classic doors?
#1
Scooby Regular
Thread Starter
What do I need to fit Infinity comps into classic doors?
I've got 6500CS components to go in my MY00 impreza. What bits/parts do I need over and above whats in the box to fit them?
Are spacers/brackets available or will I have to make them up?
Also I want the tweeters behind the grill next to the door handle. What will I need to do this?
Only asking now, becuase I don't fancy taking the door cards off and making the usual 3 or 4 trips to halfrauds to get the bits I've forgotten!!
many thanks
Are spacers/brackets available or will I have to make them up?
Also I want the tweeters behind the grill next to the door handle. What will I need to do this?
Only asking now, becuase I don't fancy taking the door cards off and making the usual 3 or 4 trips to halfrauds to get the bits I've forgotten!!
many thanks
#2
Scooby Regular
Join Date: Jul 2003
Location: Surviving as a soldier of fortune on the Los Angeles underground...
Posts: 7,181
Likes: 0
Received 0 Likes
on
0 Posts
I got 18mm spacers from autoacoustics - but I also needed some longer screws from halfords to fit them - found some that were perfect, will find the code no. and post it later.
Don't bother with the autoleads plastic spacers, they don't fit. I think dealers sell a tweeter mounting kit for the grille next to the handle but I fixed mine to the black triangluar peice that covers the wing mirror mountings, the kit I got had angles in it to face them into the centre of the car. (Infinity 655CS)
Don't bother with the autoleads plastic spacers, they don't fit. I think dealers sell a tweeter mounting kit for the grille next to the handle but I fixed mine to the black triangluar peice that covers the wing mirror mountings, the kit I got had angles in it to face them into the centre of the car. (Infinity 655CS)
#3
Scooby Regular
Join Date: Jul 2003
Location: Surviving as a soldier of fortune on the Los Angeles underground...
Posts: 7,181
Likes: 0
Received 0 Likes
on
0 Posts
HFX 139 - is the screw code from Halfords.
Only thing is that when you drill the holes into the spacer, you'll need to use a bigger drill bit so you can countersink it.
Only thing is that when you drill the holes into the spacer, you'll need to use a bigger drill bit so you can countersink it.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Rocco13
ScoobyNet General
8
13 September 2015 08:11 PM