Spacers - What Thickness MDF Is Required ?
#1
Moderator
Thread Starter
iTrader: (5)
Join Date: Nov 2001
Location: Not all those who wander are lost
Posts: 17,863
Received 0 Likes
on
0 Posts
Spacers - What Thickness MDF Is Required ?
I'm am going to fit some Cerwin Vega components (6.5" woofers) into my MY03 front doors.
Does anyone know what thickness of MDF will need to make up my spacers ? The speakers are 62mm in depth.
Many thanks,
Dunk
Does anyone know what thickness of MDF will need to make up my spacers ? The speakers are 62mm in depth.
Many thanks,
Dunk
#2
Moderator
Thread Starter
iTrader: (5)
Join Date: Nov 2001
Location: Not all those who wander are lost
Posts: 17,863
Received 0 Likes
on
0 Posts
Oooh, actually, the speaker depth is 62mm so the mounting depth may be less ?
I see 12mm MDF has been used for the Infinity 6000's, anyone know the speaker depth of those ?
I see 12mm MDF has been used for the Infinity 6000's, anyone know the speaker depth of those ?
#4
Hiya DJ Dunk
I've just ordered some 6000CS from cel-direct.com. Their website says the mounting depth is 53mm (or 2 & one sixteenth inches if you prefer!).
Don't know if it's relevant, but the 6000CS are 6 inch diameter. The 6500CS is 6.5 inch diameter and has a 62mm mounting depth - don't know if the Cerwin's would be the same though.
Hope that helps.
Cheers,
Steve
I've just ordered some 6000CS from cel-direct.com. Their website says the mounting depth is 53mm (or 2 & one sixteenth inches if you prefer!).
Don't know if it's relevant, but the 6000CS are 6 inch diameter. The 6500CS is 6.5 inch diameter and has a 62mm mounting depth - don't know if the Cerwin's would be the same though.
Hope that helps.
Cheers,
Steve
#5
Moderator
Thread Starter
iTrader: (5)
Join Date: Nov 2001
Location: Not all those who wander are lost
Posts: 17,863
Received 0 Likes
on
0 Posts
Alcazar - I could, but just wanted to get an opinion before I tear into my door cards, but good point.
Steve - Thanks, 12mm should be fine then.
Will crack open the door and have a measure.
All the best,
Dunk
Steve - Thanks, 12mm should be fine then.
Will crack open the door and have a measure.
All the best,
Dunk
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM