fitting single din units
#1
Scooby Regular
Thread Starter
Join Date: Aug 2003
Location: kent
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
i collect my myo3 wrx at the end off next month and i want to change the head unit from a double din to a single din. do the single din units go straight into the exsisting space? and is there any problems in fitting two single din units?.
i have heard different rumours about having to trim the dash etc is this true?
many thanks for your help
i have heard different rumours about having to trim the dash etc is this true?
many thanks for your help
#2
Generally there is no problem at all. You need to make sure of a couple of things though.
a - that the headunit trim is removeable or fits the dash trim aperture. The headunit is built in place and the dash trim fitted over it, so it's not a 'slide in from the front' unit.
b- that the headunit has screw holes on the side which match up with the brackets in the car. You fit the brackets to the headunit then build the whole thing in to the dash. You can fit another DIN sized unit at this point or a SECS or a storage pocket...
a - that the headunit trim is removeable or fits the dash trim aperture. The headunit is built in place and the dash trim fitted over it, so it's not a 'slide in from the front' unit.
b- that the headunit has screw holes on the side which match up with the brackets in the car. You fit the brackets to the headunit then build the whole thing in to the dash. You can fit another DIN sized unit at this point or a SECS or a storage pocket...
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM