Does any1 know how to make a stealthbox?
#1
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
mdf for everything that you can then fibreglass for the rest.. and lots of it... lay a bin liner over the surface you are molding from...
Drop me a mail if you need more info..
JL Audio site used to be pretty good.
David
Drop me a mail if you need more info..
JL Audio site used to be pretty good.
David
#2
I made one....
....out of cardboard and packing tape
the plan is to use it as a prototype for a MDF one - but if it's anything like my DIY Decat idea I'll probably end up just buying a real one - life's too short!
Cheers
Chris
....out of cardboard and packing tape
the plan is to use it as a prototype for a MDF one - but if it's anything like my DIY Decat idea I'll probably end up just buying a real one - life's too short!
Cheers
Chris
#4
Scooby Regular
Join Date: Feb 2002
Location: oustide the asylum?
Posts: 3,306
Likes: 0
Received 0 Likes
on
0 Posts
Slightly off topic, but is there some accoustic property of MDF that makes it superior in terms of sound to a decent marine ply?
I dislike MDF - I can't get on with it for various reasons...
I dislike MDF - I can't get on with it for various reasons...
#5
been thinking about how to make one and just checking to see if im on the right lines. or does anyone have a link to a site that show you how to make one.
and how big do you need it to be (volume)
Ray
[Edited by Ray_li - 9/10/2002 7:16:48 PM]
and how big do you need it to be (volume)
Ray
[Edited by Ray_li - 9/10/2002 7:16:48 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM