Anyone removed a standard stereo? There doesn't seem to be any holes for attaching tools for removal, haven't had a really secent look but if you have.........

 

If its the Addzest Double din in say <MY00 then its just a case of 4 Phillips head screws that secure the unit in, you will have to remove the silver surround of the heater controls and the unit to get to them, basically remove this, and you should see the 4 screw heads, 2 on each side, take these out and the unit will pull out.

Dunno bout MY01> tho.

 

It's a 93, no silver but could be the same. Got a couple of days off now so we will see, thanks for replying it seems that only threads on the main board get viewed/replied!

 

Tony,

No probs m8, good luck with it, it's pretty simple, once the surround is off it should be plain sailing from there

 

Cheers M8, Done it now once I uncovered the coffee holder. I'm now the proud owner of an incomplete WRX stereo wiring diagram. If anyone needs the speaker colour etc. I have it!

 

Glad you sorted it