Installing ICE in boot (replicated thread)
Thread Starter
Scooby Newbie
Joined: Jun 2002
Posts: 3
Likes: 0
looks good m8, ive emailed u bout the username,just checking out ya web site now. i removed my back seats 2day to look at how to remove shelf, but couldnt seem to actually get the shelf free, how do u do it, & can u only fit 6x9's ? coz my pioneers r 8" speakers, thanx
Scooby Regular
Joined: Jun 2000
Posts: 13,735
Likes: 0
bf,
There's instructions for removing the shelf in the FAQ. Bit of a sod, but you'll manage it.
some 6x9s drop straight in, others require metal to be cut. For 8"s, I'd recommend fitting them underneath the existing holes.
There's instructions for removing the shelf in the FAQ. Bit of a sod, but you'll manage it.
some 6x9s drop straight in, others require metal to be cut. For 8"s, I'd recommend fitting them underneath the existing holes.
Scooby Regular
Joined: Nov 2001
Posts: 15,239
Likes: 1
From: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
If you raise the box two inch and let the carpet hang down and support it with velcro at the bottom to stop it flapping about, you can still get the spare out..
David
David
.Trending Topics
Scooby Regular
Joined: Jun 2000
Posts: 13,735
Likes: 0
This was originally a thread by "BF" - which was an offensive username that's been deleted.
Here's the info that was on it:
From BF
from Steve McCulloch
From BF
From Twinny
Cheers,
Nick.
[Edited by chiark - 6/9/2002 3:32:58 PM]
Here's the info that was on it:
From BF
i can anyone give me some ideas about a good install for an amp and coupla 12" subs, i wanna do a good install, but leave enuff room 2 get to the spare wheel....
I have this sort of set up and can easily get at the spare wheel.
Replaced behind rear seat (bit of crappy material) with a bit of decent wood (covered)
Mounted two Geneseis subs and a 1.5 Farad on this board
Mounted two 12 inch subs (double box) in front of amps in the boot - with a mounting bracket drilled into the metal near the top of boot... all I have to do is undo 2 screws and lift the subs out to get at the Rear wheel.... - i.e not a permanent fixture - so I can remove subs at any time and have the boot space back again!
Replaced behind rear seat (bit of crappy material) with a bit of decent wood (covered)
Mounted two Geneseis subs and a 1.5 Farad on this board
Mounted two 12 inch subs (double box) in front of amps in the boot - with a mounting bracket drilled into the metal near the top of boot... all I have to do is undo 2 screws and lift the subs out to get at the Rear wheel.... - i.e not a permanent fixture - so I can remove subs at any time and have the boot space back again!
cool, thanx, any pix ?
You can find some pix of my amp install in the trunk on this URL: http://pssshh.hjem.no/apps/pbcs.dll/...6020001&Ref=AR
Nick.
[Edited by chiark - 6/9/2002 3:32:58 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
