Pro-Line Motorsport

Group buy for our ABS Delete kits will be valid for 1 month only from today (20th feb - 20th march 2016) based on a minimum of 5 members, if 10 members interested we can offer further discounts.

Full abs delete kits available for all makes and models.

These kits replace all the standard hard lines throughout the car, from the master cylinder to the wheel arches (calliper lines available seperately) replacing them for high performance Teflon lined stainless steel braided hoses in a wide range of colours, removing the factory abs units which isnt up to much and has been known to be extremely dangerous.

Kit will include:

Line from BMC to front tee piece
2x lines from front tee piece to inner wings
Line from BMC to rear tee piece
2x Lines from rear tee piece to inner wings
2x Tee pieces
20x Nylon P clips
20x Self tapping screws
2x New banjo bolts
4x Copper washers

Half kit also available, which is consists of:

Full bulkhead kit also available, see below.

We can also supply custom kits to your requirements, through car bulkhead fittings/hydraulic handbrake connections and bias valves. Bias valves also available, Wilwood, Tilton and AP Racing.

All of our brake lines are professionally assembled in house using Hel performance fittings.


Full kit £164.99

Group buy price £120!!

Full kit with bulkhead fittings £195.....this kit is designed for cars with stripped interiors where no rear seats are in place etc as the lines run the centre of the car and split across the rear in place of the bench, includes lines with bulkhead fittings for a more proffesional, neater install.

Group buy price £150!!

johnnybon

iTrader: (70)

Don't look like this is going well I would be interested in a full kit for a blob eye also can this be changed for a bias valve and hydrolic hand brake if so how much

Briggsywrx

I would be after a full kit. Do you offer fitment of the kit too ?

cookstar

iTrader: (6)

Me too, fitted.

Fully stripped out car.

jody0702

Am keen to get involved. Full pro bulkhead kit with bias and Tilton lever control. 94 import sti

Pro-Line Motorsport

Yes we offer bias/hydro and line lock fitted kits for an additional charge of £20 per connection.

We can also supply bias valves from Wilwood, Tilton and AP Racing.

Yes we offer a fitted service, kit and spec dependant. Please get in touch via pm for a fitted option


Great, and again please see above and get in touch re this option

Pro-Line Motorsport

Very pleased to see interest in this guys..

Copy and paste and add/delete names where necessary and add which kit you'd like with or without bias/hydro connections.

1. Johnnybon
2. Briggsywrx
3. Cookstar
4. Jody0702

forgedmarco

iTrader: (10)

1. Johnnybon
2. Briggsywrx
3. Cookstar
4. Jody0702
5. Forgedmarco full kit

jody0702

1. Johnnybon
2. Briggsywrx
3. Cookstar
4. Jody0702 - full pro bulkhead kit-Tilton lever bias
5. Forgedmarco full kit

johnnybon

iTrader: (70)

1. Johnnybon black/bias valve/full pro bulkhead kit
2. Briggsywrx
3. Cookstar
4. Jody0702 - full pro bulkhead kit-Tilton lever bias
5. Forgedmarco full kit

Can you post some pics of the bias valve options please

Philturbo1

6#philturbo1 I want one but carnt copy and paste due to using a phone.... full kit

jody0702

1. Johnnybon black/bias valve/full pro bulkhead kit
2. Briggsywrx
3. Cookstar
4. Jody0702 - full pro bulkhead kit-Tilton lever bias-carbolook
5. Forgedmarco full kit
6. Philturbo1 full kit

mogs132

very interested but was just wondering how does the car bias the breaks? is it thru the abs block? will I need a bias valve aswell to set up the brakes?

Pro-Line Motorsport

As a stock car with abs yes its the module that does the bias, id always recommend fitting a bias valve although i have supplied many kits without bias valve with good feedback. It will also depend what the car is used for, track car i would say fit one, road car..maybe not.

I can supply bias valves with the kits from Wilwood, Tilton or AP Racing.

Hope this helps.

mogs132

ok how much for the main kit with a bias valve? which valve would you recommend?

Pro-Line Motorsport

We can supply bias valves from Wilwood, Tilton and AP Racing..prices are as follows:

Wilwood **** type £53
Tilton lever type £95
AP **** type £145
AP lever type £180

We always recommend the tilton lever type valves.

Philturbo1

Im not been stupid but ive got a uk 97 turbo can the cars stock bias valve still be used with this kit?

Pro-Line Motorsport

Hi Phil, pretty sure its only the non abs cars that have a factory bias valve as its the abs module that does the biasing.

But yes, a stock non abs bias valve can be used as long as we are aware upon making your order.

Bare in mind its not adjustable though.

Regards.

johnnybon

iTrader: (70)

. Johnnybon carbolook/ap **** bias valve/full pro bulkhead kit
2. Briggsywrx
3. Cookstar
4. Jody0702 - full pro bulkhead kit-Tilton lever bias-carbolook
5. Forgedmarco full kit
6. Philturbo1 full kit

Pro-Line Motorsport

Right guys..only 5 days left on the group buy!!

We are now over the 5 needed so deposit or full payments can now be paid..once i recieve all payments in full the kits will be made and sent out!

If paying by paypal, please make sure your username, full order, colour and full name and delivery address is attached to paypal so as to not confuse things my end. For bank transfer or debit/credit card payments please get in touch for details.

Paypal address is....... Prolinemotorsport@gmail.com

Please also add £5.80 for delivery.

Thanks again guys and girls its been a success!!

alex_00s

iTrader: (18)

Mitch fitted my ABS delete and did a fantastic job!

I may come back for a bias valve tho mate I think I'd like one to play with

Philturbo1

Is a bias valve recommended or even needed on a road car. If I don't have a bias valve is the split 50/50 or am I not understanding the bias thing right.

Laupy

iTrader: (2)

Is the brake system on a wagon different? I'm sure I saw a bias valve mounted near the strut tower on mine... Would like to dump my ABS but would also like to keey my bias valve if I have one.

jody0702

. Johnnybon carbolook/ap **** bias valve/full pro bulkhead kit
2. Briggsywrx
3. Cookstar
4. Jody0702 - full pro bulkhead kit-Tilton lever bias-carbolook- PAID IN FULL
5. Forgedmarco full kit
6. Philturbo1 full kit

Pro-Line Motorsport

Unless someone has fitted one, itll be a connector block to rear brakes, alot of people get confused and assume its a bias, looks similar to the non abs items which are a proportion/bias valve.

As said, i can supply bias valves from as little as £50! Adjustable too..

Pro-Line Motorsport

PAID:

Jody0702
Philturbo1
Forgedmarco
Johnnybon

johnnybon

iTrader: (70)

Can you pm me a final price delivered

Pro-Line Motorsport

£320.80 on your kit with bias valve and connection Johnny

Pro-Line Motorsport

Last day of the group buy guys! Get them orders in today or miss out!!!

For those not paid yet, please do so asap so as we can get the kits made up and sent out!!

jody0702

This is my first group buy, do many of these things go sideways thru non payments? Starting to get worried...