Mad Hammer

iTrader: (55)

After the success of the first group buy I thought I would offer it again.

See thread no.1 https://www.scoobynet.com/group-buys...atch-cans.html

I have recently had a catch can made for for track car build. I had done the same previously for my race car as the general market forgets about us Subaru boys needing 3 inlets rather than just 1 or 2. I am sure you have seen the RCM ones at £175+ !

It's certainly not cheap to get one made to the standard I wanted, however I was chatting with my supplier and he said he would be more than happy to do a batch at reduced costs if I would handle everything.

So spec is a 1 litre can with three 10mm inlets and one 25mm outlet. And a drain plug

We all know what the benefits are I am sure by getting rid of engine vapour, reducing crankcase pressure and by removing that vapour your not reducing the octane value of your fuel.

Heres a few pics of the one I have now unfitted.




Here's a pic of my other one I fitted on the passenger side suspension turret where it fits very neatly



Here's the fitting guide -



Pipes on cam cover breathers -




Main engine breather here, you will see 2 pipes. Really you want to block off one and then run a pipe from here to the can



Three pipes in to the can



Then breather pipe from top of the can



Costs if there is demand for 10 minimum

£65 Can only
£75 Can with -10 AN Drain
£10 extra to include pipework

Get your names down with what you want

scoobyandscrappy

yes please can you put my name down can with drain no pipe work

wrighty338

iTrader: (33)

as im sure everyone else who was in on the last GB will tell you, the item is fapping quality and the service from clive is excellent.

brockalightus

iTrader: (2)

Can only please..........

Myk

Just a can for me

Cheers

Mad Hammer

iTrader: (55)

Scoobyandscrappy - Can and -10 fitting
brockalightus - Can
Myk - Can

MarkC

iTrader: (12)

mark v4 coupe -Can

Mad Hammer

iTrader: (55)

Scoobyandscrappy - Can and -10 fitting
brockalightus - Can
Myk - Can
mark v4 coupe -Can
.
.
.
.
.
.

Neil..

iTrader: (35)

Scoobyandscrappy - Can and -10 fitting
brockalightus - Can
Myk - Can
mark v4 coupe -Can
E_M_B can only (x2)
.
.
.
.
.
__________________

thoughto

iTrader: (1)

Excuse me if this is obvious Mad Hammer, but did you remove the canister from your engine bay, and is that why this fits so nicely? I don't think my engine bay has so much space.

Mad Hammer

iTrader: (55)

Air con canister thing ? Not had one on either of mine as no air con Still on a serious note there is plenty of room down there as you can see.

MarkC

iTrader: (12)

Sorry i will have to drop out of this groupbuy

Mad Hammer

iTrader: (55)

Scoobyandscrappy - Can and -10 fitting
brockalightus - Can
Myk - Can
E_M_B can only (x2)

Mad Hammer

iTrader: (55)

Anyone else ? If we can't get 10 I will give my guys a call and see if they will do less than 10 for the same price. I will leave this open until Monday 1st March

T20Driver

iTrader: (3)

Please add me .. Can with 10mm drain please .. NO pipes .. ta

Mad Hammer

iTrader: (55)

Scoobyandscrappy - Can and -10 fitting
brockalightus - Can
Myk - Can
E_M_B can only (x2)
T20Driver - Can and -10 fitting

dunks

iTrader: (1)

Please add me. Can with drain please

Mad Hammer

iTrader: (55)

Scoobyandscrappy - Can and -10 fitting
brockalightus - Can
Myk - Can
E_M_B can only (x2)
T20Driver - Can and -10 fitting
Dunks - Can and -10 fitting

Mad Hammer

iTrader: (55)

Anyone else ?

millzy555

iTrader: (2)

would like to see one fitted with air con and are they baffeled inside?

Mad Hammer

iTrader: (55)

Not baffled no, I have no pic of one fitted with air con, but there is room. Perhaps there maybe someone who has fitted with aircon on here ?

scoobyandscrappy

my car has air con so ill find some where to put it

Jamz_

iTrader: (12)

Has no one seen these like? Bigger capacity and half the price:
https://www.scoobynet.com/private-sa...catch-can.html

Mad Hammer

iTrader: (55)

Cheers fella ! And half the quality if you look closely ! Blatent copy of mine also, great when you go to the effort of doing something like this

Back on topic, if you guys still want to go ahead please confirm and I will continue and order this week.

Clive

scoobyandscrappy

just look how there made and i'm sorry i might pay a bit more but looks alot better made
well said clive

brockalightus

iTrader: (2)

no accounting for quality Jamz

still looking 1 here.......

banny sti

iTrader: (68)

I have one of each and the one from the group buy is a million times better in quality, like the age old saying goes "you get what you pay for"

Banny

pistol

where does the larger pipe then go to?

just dumps it on the floor, unless your sensible and drain it out?!

Mad Hammer

iTrader: (55)

It's only the gases that escape

pistol

DOH!!! another question, where's the main engine breather pipe?

is it under the intercooler? or tips so i can find it...