Subaru Specific Catch Cans '2'
 

After the success of the first group buy I thought I would offer it again.

See thread no.1 https://www.scoobynet.com/group-buys...atch-cans.html

I have recently had a catch can made for for track car build. I had done the same previously for my race car as the general market forgets about us Subaru boys needing 3 inlets rather than just 1 or 2. I am sure you have seen the RCM ones at £175+ !

It's certainly not cheap to get one made to the standard I wanted, however I was chatting with my supplier and he said he would be more than happy to do a batch at reduced costs if I would handle everything.

So spec is a 1 litre can with three 10mm inlets and one 25mm outlet. And a drain plug

We all know what the benefits are I am sure by getting rid of engine vapour, reducing crankcase pressure and by removing that vapour your not reducing the octane value of your fuel.

Heres a few pics of the one I have now unfitted.
http://i2.photobucket.com/albums/y21/clive1973/Can1.jpg
http://i2.photobucket.com/albums/y21/clive1973/Can2.jpg
http://i2.photobucket.com/albums/y21/clive1973/Can3.jpg

Here's a pic of my other one I fitted on the passenger side suspension turret where it fits very neatly :)

http://i2.photobucket.com/albums/y21.../Catchcan4.jpg

Here's the fitting guide -

http://i2.photobucket.com/albums/y21/clive1973/Can6.jpg

Pipes on cam cover breathers -

http://i2.photobucket.com/albums/y21/clive1973/Can5.jpg
http://i2.photobucket.com/albums/y21...973/Can3-1.jpg

Main engine breather here, you will see 2 pipes. Really you want to block off one and then run a pipe from here to the can

http://i2.photobucket.com/albums/y21/clive1973/Can4.jpg

Three pipes in to the can

http://i2.photobucket.com/albums/y21...973/Can2-1.jpg

Then breather pipe from top of the can

http://i2.photobucket.com/albums/y21...973/Can1-1.jpg

Costs if there is demand for 10 minimum

£65 Can only
£75 Can with -10 AN Drain
£10 extra to include pipework

Get your names down with what you want :)

yes please can you put my name down can with drain no pipe work :luxhello::luxhello:

as im sure everyone else who was in on the last GB will tell you, the item is fapping quality and the service from clive is excellent.

Can only please..........

Just a can for me :)

Cheers

Scoobyandscrappy - Can and -10 fitting
brockalightus - Can
Myk - Can

mark v4 coupe -Can

Scoobyandscrappy - Can and -10 fitting
brockalightus - Can
Myk - Can
mark v4 coupe -Can
.
.
.
.
.
.

Scoobyandscrappy - Can and -10 fitting
brockalightus - Can
Myk - Can
mark v4 coupe -Can
E_M_B can only (x2)
.
.
.
.
.
__________________

Excuse me if this is obvious Mad Hammer, but did you remove the canister from your engine bay, and is that why this fits so nicely? I don't think my engine bay has so much space.

Air con canister thing ? Not had one on either of mine as no air con :) Still on a serious note there is plenty of room down there as you can see.

Sorry i will have to drop out of this groupbuy

Scoobyandscrappy - Can and -10 fitting
brockalightus - Can
Myk - Can
E_M_B can only (x2)

Anyone else ? If we can't get 10 I will give my guys a call and see if they will do less than 10 for the same price. I will leave this open until Monday 1st March

Please add me .. Can with 10mm drain please .. NO pipes .. ta

Scoobyandscrappy - Can and -10 fitting
brockalightus - Can
Myk - Can
E_M_B can only (x2)
T20Driver - Can and -10 fitting

Please add me. Can with drain please

Scoobyandscrappy - Can and -10 fitting
brockalightus - Can
Myk - Can
E_M_B can only (x2)
T20Driver - Can and -10 fitting
Dunks - Can and -10 fitting

Anyone else ?

would like to see one fitted with air con and are they baffeled inside?

Not baffled no, I have no pic of one fitted with air con, but there is room. Perhaps there maybe someone who has fitted with aircon on here ?

my car has air con so ill find some where to put it :lol:

Has no one seen these like? Bigger capacity and half the price:
https://www.scoobynet.com/private-sa...catch-can.html

Cheers fella ! And half the quality if you look closely ! Blatent copy of mine also, great when you go to the effort of doing something like this :(

Back on topic, if you guys still want to go ahead please confirm and I will continue and order this week.

Clive

:eek: just look how there made and i'm sorry i might pay a bit more but looks alot better made
well said clive :luxhello::luxhello:

no accounting for quality Jamz

still looking 1 here.......:thumb:

I have one of each and the one from the group buy is a million times better in quality, like the age old saying goes "you get what you pay for" ;)

Banny

where does the larger pipe then go to?

just dumps it on the floor, unless your sensible and drain it out?!

It's only the gases that escape ;)

DOH!!! another question, where's the main engine breather pipe?

is it under the intercooler? or tips so i can find it...