DaveBeck

iTrader: (12)

My clutch has gone. Putting in new engine next week so now is the time to change it.

Havent had chance to check the clutch untill its out so not sure if i only require the plate but if a good deal comes along i'll get it all

im dropping in a 2.5 lump but because i cant afford a gearbox upgrade right now i will be limiting the tq to 350 max.

What clutches can be offered to either handle 350 or 400lbtq?

Any trader fancy putting on a group buy? Or does anyone else need a clutch?

scoobyschef

iTrader: (6)

i need a 6 speed and flywheel at least 450 rated

jim

SNAP-ON

iTrader: (1)

i need a clutch for my 03wrx !! i can get an jap adl clutch which i have been told is an exedy aswell (all the same) for £200 but would like a cheaper one if there is a group buy ?

radboy69

also interested as i might need 1 soon

bren@apex

iTrader: (20)

We can offer ACT and Exedy if theyre of interest?

wrighty338

iTrader: (33)

i need one that will run 400/400 to be safe - classic, 6 puck or organic

DaveBeck

iTrader: (12)

Sounds good Bren,

what can you offer please?
400/400 sounds good to me

radboy69

same as above bren for a v3 type r...

dan

dan06wrx

I could be interested Bren at the right price.

06 Hawkeye WRX 2.5

bren@apex

iTrader: (20)

Heres some options for you to look at, what would you guys be after?

Products for you Euro/JDM Applications | Products ~ Advanced Clutch Technology

GazJenno

I would be intrested in a early WRX uprated clutch and lightened flywheel

was look at the Exedy Organic clutch

bren@apex

iTrader: (20)

Exedy:

5 Speed Impreza Exedy organic kit £269
5 Speed Impreza Exedy paddle kit £325
6 Speed Impreza Exedy organic kit £319
6 Speed Impreza Exedy paddle kit £365
5 speed 6 kilo flywheel £199
6 speed 5.75 kilo flywheel £215

Carriage is £11.75.

Buy a clutch and flywheel and get free carriage

dilbob

iTrader: (9)

ooo.... very interested in a clutch and flywheel at those prices do the prices go up or down dependant on the amount off people?

when will it start and end bren?

bren@apex

iTrader: (20)

The prices are really based on 5+ people but to save messing about we will just send them at those prices on a one come one served basis I.e. just give us a ring to order, 01274 683633.

Availability is limited on the flywheels however it doesnt take long to get more if we run out, around 2 weeks.

bren@apex

iTrader: (20)

Exedy kits are rated at 320lb/ft for organic and 360lb/ft for paddle.

wrighty338

iTrader: (33)

How much for a ACT SB3-HDMM kit, there rated at 429 ft/lbs according to that page + looks organic

DaveBeck

iTrader: (12)

Cant argue with them prices Bren, much appreciated

Do you have anything thats handles 400lb/ft?

also can a friction plate be purchased seperately?

cheers

Scooby Dan

Bren , do you have any deals on anything that can take over 500lb/ft ?
I have recently bought a car fitted with an Exedy twin plate and I dont like it one little bit ! I dont know if it is on its way out or if it is just me but the bite seems to be at a different point everytime I pull away and I get a bad judder through the car at about 1800rpm in the higher gears.
Cheers
Dan

bren@apex

iTrader: (20)

Just bear with me guys, working on ACT prices for those running bigger power. Might be able to do something sexy without resorting to sea freight

71/200

iTrader: (2)

^^^ Waiting with Patience, need something strong!

ST AYE

Bren did you receive my mail asking about an Exedy compe-d dual plate clutch for a 03 6sp
Thanks

petedotuk

Can anyone tell me what the standard newage sti clutch can handle?

bren@apex

iTrader: (20)

Yeah, we are waiting on a reply from Exedy Japan but Ive sent you details of a sexy offer

Im double checking details of some shipping costs are accurate as they seem a little too good to be true. If they are correct then happy days, it will bring the kit prices down further. However I cant commit to prices until details have been verified.

ST AYE

Thanks Bren
Nice price
Sent a reply
Regards

bren@apex

iTrader: (20)

Just a little confused here with applications. I thought 5 speed were all 230mm drive plate and 6 speed were 240mm but ACT are listing 02-05 STi and 2.5l 05+ Sti as using different cover and different drive plate.

So theres three kits for the Imprezas? Sorry for my ignorance, Im on a learning curve here!

bren@apex

iTrader: (20)

Im trying to neaten up the table but prices are as below. These are all ACT kits, for more info have a look here:

http://www.advancedclutch.com/produc..._jdm_apps.aspx

Ill place an order 2 weeks on Friday with a 2 week lead time assuming everythings in stock with ACT. No minimum order quantity, just give us a shout and place the order

Part Part No Torque FT/LBS Price

Impreza 93-05 EJ20 230mm plate diameter

Organic heavy duty SB3-HDMM 549 £463.41
4 puck sprung paddle SB3-HDG6 549 £451.66
6 puck sprung paddle SB3-HDG4 429 £439.91
4 puck paddle SB3-HDR6 549 £436.24
6 puck paddle SB3-HDR4 549 £424.16
Streetlite flywheel 600175 6.32 kilo £182.65
Prolite flywheel 600170 4.35 kilo £198.98

Impreza 02-05 EJ20 240mm plate diameter

Organic heavy duty SB4-HDSS 659 £533.95
4 puck sprung paddle SB4-HDG6 659 £494.13
6 puck sprung paddle SB4-HDG4 515 £476.50
4 puck paddle SB4-HDR6 659 £472.83
6 puck paddle SB4-HDR4 659 £460.75
Organic extreme SB4-XTSS 724 £560.86
4 puck sprung paddle extreme SB4-XTG6 724 £521.03
6 puck sprung paddle extreme SB4-XTG4 566 £503.40
4 puck paddle extreme SB4-XTR6 724 £499.73
6 puck paddle extreme SB4-XTR4 724 £487.66
Streetlite flywheel 600235 6.82 kilo £235.54
Prolite flywheel 600240 5.05 kilo £252.67

Impreza 06-07 EJ25 240mm plate diameter

Organic heavy duty SB5-HDMM 537 £480.63
4 puck sprung paddle SB5-HDG6 537 £468.88
6 puck sprung paddle SB5-HDG4 420 £457.13
4 puck paddle SB5-HDR6 537 £453.46
6 puck paddle SB5-HDR4 537 £441.38
600480 6.55 kilo £186.42
600475 4.59 kilo £210.40

ST AYE

Hi Bren
Any news on the Exedy compe-d dual plate clutch
Thanks

bren@apex

iTrader: (20)

Nope, no reply from Exedy yet. Will email Exedy again now. Ive asked them to just tell us its unavailable if its unavailable so you can move on

bren@apex

iTrader: (20)

Oooh, sitting down? £1675 inc vat, 3 month lead time.

wrx9181

iTrader: (2)

The clutch we want is the Exedy hyper. price for this please