Group buy on Carbon fibre engine parts for the classic and bugeye
#1
Group buy on Carbon fibre engine parts for the classic and bugeye
Hello again chaps!
I am starting another group buy for some more PRE-PREG Carbon fibre bits made by ScoobySi. The list below and links are for the classic and bugeye cars, I am not too sure if any of the bugeye stuff will fit the new age impreza! Maybe you can tell me. We are not 100% sure of prices yet (even though Si has made rough estimates on how they may be priced) but that will depend on how many buyers there is etc and will be sorted very soon. If any of you are going to scooby shootout you will be able to place an order soon and be able to pick it up at the event. There is also again the option to laquer the parts which will be around the £10-£20 mark depending on size. The laquered kit (£160 a litre and sprayed by a ferrari paint sprayer)looks absolutely great,Thanx scoobySi's wife for the free laquer on my splitter All I can say is if the rest of the kit is like the splitters, then i am up for it If anyone is interested put your name down below and I will see what I can come up with. Here is the list.
http://homepage.ntlworld.com/simon....2B/DSCF0070.JPG
http://homepage.ntlworld.com/simon....2B/DSCF0069.JPG
we are doing
for the CLASSIC;
tilt kit
splitter
pulley covers
fuse box cover
slam panel
cambelt covers still being tested
for the BUGEYE;
pulley cover
air intake cover
and the little relay cover behind the air box;
cambelt covers still being tested
I am starting another group buy for some more PRE-PREG Carbon fibre bits made by ScoobySi. The list below and links are for the classic and bugeye cars, I am not too sure if any of the bugeye stuff will fit the new age impreza! Maybe you can tell me. We are not 100% sure of prices yet (even though Si has made rough estimates on how they may be priced) but that will depend on how many buyers there is etc and will be sorted very soon. If any of you are going to scooby shootout you will be able to place an order soon and be able to pick it up at the event. There is also again the option to laquer the parts which will be around the £10-£20 mark depending on size. The laquered kit (£160 a litre and sprayed by a ferrari paint sprayer)looks absolutely great,Thanx scoobySi's wife for the free laquer on my splitter All I can say is if the rest of the kit is like the splitters, then i am up for it If anyone is interested put your name down below and I will see what I can come up with. Here is the list.
http://homepage.ntlworld.com/simon....2B/DSCF0070.JPG
http://homepage.ntlworld.com/simon....2B/DSCF0069.JPG
we are doing
for the CLASSIC;
tilt kit
splitter
pulley covers
fuse box cover
slam panel
cambelt covers still being tested
for the BUGEYE;
pulley cover
air intake cover
and the little relay cover behind the air box;
cambelt covers still being tested
Last edited by GREEN SCOOBY; 06 May 2005 at 08:52 AM.
#2
Dont think the link I put up is working! so try this one. Looks like he will be doing a group buy on red engine parts next anyone up for that
http://homepage.ntlworld.com/simon....2B/DSCF0070.JPG
http://homepage.ntlworld.com/simon....2B/DSCF0069.JPG
http://homepage.ntlworld.com/simon....2B/DSCF0070.JPG
http://homepage.ntlworld.com/simon....2B/DSCF0069.JPG
#3
Right! its still not working! Can some one tell me how to work my computer? or better still post the links up from the old splitter group buy? bring back my good old commodore 64
#5
Scooby Regular
Join Date: May 2002
Location: 2005 sso, 1/4 finals,3rd in 60ft; 2004 sso,semi finals,2nd in 60ft time; 2003 standard car 2nd 60ft
Posts: 4,909
Likes: 0
Received 0 Likes
on
0 Posts
all the other parts will be laquered and thats in the price that i have posted up
#6
Scooby Regular
Join Date: May 2002
Location: 2005 sso, 1/4 finals,3rd in 60ft; 2004 sso,semi finals,2nd in 60ft time; 2003 standard car 2nd 60ft
Posts: 4,909
Likes: 0
Received 0 Likes
on
0 Posts
initial prices subject to interest these prices are inc of laquer and vat
classic my96 on
tilt kit £8
splitter £65
slam panel £60
fuse box cover £40
pulley cover £85 (as its a bloody pain in the **** to do lol)
cambelt covers are going to be ABOUT £200/£240 if they work out
bugeye
pulley cover £55
air intake cover £70
relay cover behind the airbox £40
many thanks
simon
classic my96 on
tilt kit £8
splitter £65
slam panel £60
fuse box cover £40
pulley cover £85 (as its a bloody pain in the **** to do lol)
cambelt covers are going to be ABOUT £200/£240 if they work out
bugeye
pulley cover £55
air intake cover £70
relay cover behind the airbox £40
many thanks
simon
Trending Topics
#9
Scooby Regular
Join Date: May 2002
Location: 2005 sso, 1/4 finals,3rd in 60ft; 2004 sso,semi finals,2nd in 60ft time; 2003 standard car 2nd 60ft
Posts: 4,909
Likes: 0
Received 0 Likes
on
0 Posts
#11
Put me down for a full carbon fibre body! inc doors bonnet and boot! How much will that be Si? That will make my 1/4 times go down a bit. Or maybe i should just go on a diet It will be about the same as bodywork
#14
Scooby Regular
Join Date: May 2002
Location: 2005 sso, 1/4 finals,3rd in 60ft; 2004 sso,semi finals,2nd in 60ft time; 2003 standard car 2nd 60ft
Posts: 4,909
Likes: 0
Received 0 Likes
on
0 Posts
adam the bottles in carbon will cost mega money,done properly due to the cost of the bags,but you will be able to buy bottle made from 2 halfs but they will leak in time(pete doesnt make these)
#15
Scooby Regular
Join Date: Jul 2003
Location: Surviving as a soldier of fortune on the Los Angeles underground...
Posts: 7,181
Likes: 0
Received 0 Likes
on
0 Posts
Any chance of doing interior parts such as the elec window surrounds or centre consoles similar (but hopefully much cheaper) than those that Nitosport did?
What about guage pods?
What about guage pods?
#16
Scooby Regular
Join Date: May 2002
Location: 2005 sso, 1/4 finals,3rd in 60ft; 2004 sso,semi finals,2nd in 60ft time; 2003 standard car 2nd 60ft
Posts: 4,909
Likes: 0
Received 0 Likes
on
0 Posts
we have been on about these bits.wot ill do is ring pete up today and ask him to post whats what if you now want i mean
centre consoles will have to be on a swap you send yours up and he will send you a carbon covered one
centre consoles will have to be on a swap you send yours up and he will send you a carbon covered one
#18
Scooby Regular
Join Date: May 2002
Location: 2005 sso, 1/4 finals,3rd in 60ft; 2004 sso,semi finals,2nd in 60ft time; 2003 standard car 2nd 60ft
Posts: 4,909
Likes: 0
Received 0 Likes
on
0 Posts
i spoke to pete yesterday and he ask if people wanted something different then to email him with a picture of what they want doing.
E-Mail: Performance.carbon@virgin.net
its that somethings you just cannt make in carbon
thx
simon
E-Mail: Performance.carbon@virgin.net
its that somethings you just cannt make in carbon
thx
simon
#19
Any chance of doing interior parts such as the elec window surrounds or centre consoles similar (but hopefully much cheaper) than those that Nitosport did?
#25
Scooby Regular
Join Date: May 2002
Location: 2005 sso, 1/4 finals,3rd in 60ft; 2004 sso,semi finals,2nd in 60ft time; 2003 standard car 2nd 60ft
Posts: 4,909
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jammers
Second that - i'm after a front spiltter for a bugeye?
James
James
no i dont due to the fact that you can get the STi one to fit.
#26
Scooby Regular
Join Date: May 2002
Location: 2005 sso, 1/4 finals,3rd in 60ft; 2004 sso,semi finals,2nd in 60ft time; 2003 standard car 2nd 60ft
Posts: 4,909
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by p1mark
oohh go on then.
i will have a slam panel and pulley cover i reckon.
i will have a slam panel and pulley cover i reckon.
#27
Scooby Regular
Join Date: Jan 2005
Location: Gloucestershire
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by scooby-si
no i dont due to the fact that you can get the STi one to fit.
#28
Scooby Regular
Join Date: Nov 2004
Location: In a 405 BHP/360 ft/lb P1 with SN superstar Sonic dog at my side!
Posts: 1,959
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by scooby-si
mark you going to the shoot out on sunday m8??
#29
Scooby Regular
Join Date: May 2002
Location: 2005 sso, 1/4 finals,3rd in 60ft; 2004 sso,semi finals,2nd in 60ft time; 2003 standard car 2nd 60ft
Posts: 4,909
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jammers
Okay, so what does the sti one look like and how much is it?
#30
Scooby Regular
Join Date: May 2002
Location: 2005 sso, 1/4 finals,3rd in 60ft; 2004 sso,semi finals,2nd in 60ft time; 2003 standard car 2nd 60ft
Posts: 4,909
Likes: 0
Received 0 Likes
on
0 Posts
mark you still have a my address m8?? if so do you want to send me a cheque up, ive phoned pete up to start make you them up