engine code 21 replace sensor still same problem anyone help
#1
Scooby Newbie
Thread Starter
Join Date: Sep 2013
Location: scotland
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
engine code 21 replace sensor still same problem anyone help
hi i have a 1994 wrx automatic just bought the car a few mounths ago and took it out a couple weeks ago and check engine light came on. the next day when i went out to start it it strugeld to start, once i finaly got it started when ever you give it throttel it would cut out. once it warms abit and you give it throttel it would pop a couple of time then rev. but once engine is hot seems to run fine. i ran the engine codes and code 21 and 23 came up. i have replaced the coolant temprature sensor (code 21) and still no change and i had a look at air flow sensor (code 23) that seem to be fine and when i disconected it from the car when it was running the car cut out. so the ecu must still be getting signals from that. not really sure where to start looking next can anyone help? also my cooling fans behind radiator on constantly now. any help would be great thanks
#4
Scooby Newbie
Thread Starter
Join Date: Sep 2013
Location: scotland
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
how do you reset the ecu not 100% sure on how to do it just no black connectors were to read codes. dont no if that will work just replaced the sensor today and no difference but all go give it a try.
Last edited by aarron123; 26 September 2013 at 08:29 PM.
#5
Scooby Regular
iTrader: (7)
Join Date: Mar 2013
Location: Belfast
Posts: 2,999
Likes: 0
Received 0 Likes
on
0 Posts
You need to reset the ECU to get it back to default ignition and fuelling settings. It learns the whole time you drive it and if there's a sensor that's iffy it will compensate for it. I had a vacuum leak and a dead knock sensor. I physically fixed the parts but the car still went like a dog until I reset the ECU.
I'll try to find the link to it now and post it.
I'll try to find the link to it now and post it.
Trending Topics
#9
Scooby Newbie
Thread Starter
Join Date: Sep 2013
Location: scotland
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
cheers for the help that did the trick took it out last night and reset ecu the engine management light went out and when i went to start it today fired up first time. worked wonders for autobox changes to less early changes thanks agen for the help handy to no for future to.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
charlesr
General Technical
9
28 September 2015 09:16 AM
aaron_ions
General Technical
1
17 September 2015 10:42 AM