Help needed boosting to 23 to 25 psi scarred
#1
Scooby Newbie
Thread Starter
Join Date: Sep 2013
Location: swansea
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Help needed boosting to 23 to 25 psi scarred
hello first post, bought the car a few weeks ago and was boosting 15-16 psi apparently 336 bhp ,much quicker them my celica GT4a whitch had 270bhp so has had stuff done but no docs with car.GUT RENCHING acceleration,could fell it in my colon lol. changed boost pipes inserted pill in correct place then boost went to 23-25 psi ? . so installed mbc to control boost. think i'v done it wrong because when full anticlockwise I get 7 psi and 1 click on mbc and im getting 23-25 psi. so put back original piping and only getting 7 psi. I also took off the thing by the charcoal canister with an arrow on it and says to E/G ,not sure whitch way it goes ?
car is 1997 uk 2000 classic ,help done want to kill it lol
mbc is between turbo nipple and t piece,pill inserted
thx
car is 1997 uk 2000 classic ,help done want to kill it lol
mbc is between turbo nipple and t piece,pill inserted
thx
#4
Scooby Regular
iTrader: (2)
Theres two steel pipes stick out from underneath the manifold that go to the charcoal canister loop them together one is a little bigger than the other and throw the canister over your shoulder it should just pull up and 2 or three 10mm bolts hold the bracket on problem solved
Thread
Thread Starter
Forum
Replies
Last Post
robbie1988
Wanted
2
13 September 2015 09:25 AM
Scooby-Doo 2
Wheels And Tyres For Sale
1
09 September 2015 06:51 PM