p1junkie

iTrader: (5)

I am having a engine build at present and want to plumb in a 3 port catch can and want to know about the 2 connections on the turbo inlet pipe and what i do about them

do people just plug them and if so with what
also on the 2006 model is there a pcv conector i neeed to modify?
i really need an idiots guide if possible tks

rob84

iTrader: (5)

I plugged my ports up on my turbo intake. I left the pcv in my car due to the time it spends cruising at least it draws the crap out of the crankcase

p1junkie

iTrader: (5)

what did you plug them with

rob84

iTrader: (5)

I used plastic pipe plugs you'd get on like hydraulic pipes, just a small but of glue and pushed them in to it to seal them

p1junkie

iTrader: (5)

can you remember where u got the plugs from tks

rob84

iTrader: (5)

you can get them from ebay, But I had a couple lying in my toolbox that I'd kept from hoses etc when I did repairs etc

http://compare.ebay.co.uk/like/27122...f14=66&ff19=0#

these maybe a bit big but can be trimmed down to size

the shreksta

iTrader: (20)

is there a guide for fitting a 3 port catch can to a newage?

rob84

iTrader: (5)

There is indeed.
https://www.scoobynet.com/general-te...n-to-sump.html

the shreksta

iTrader: (20)

i dont want to return to sump tho

rob84

iTrader: (5)

just ignore the pipe to sump, the rest is the same