Rad leak
Rad leak
Hi all
Noticed water dribbling under front drivers side of the car
Checked all hoses -all good
I have read that the main rad splits down the left?
How easy to fit a new one and best place for new one ?
Your help please
Cheers nick
Noticed water dribbling under front drivers side of the car
Checked all hoses -all good
I have read that the main rad splits down the left?
How easy to fit a new one and best place for new one ?
Your help please
Cheers nick
Last edited by nooswrx; Feb 8, 2013 at 06:06 PM.
Joined: Apr 2005
Posts: 11,778
Likes: 4
From: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
If it's the rad, it's a piece of **** to replace it.
2 bolts on the slam panel and undo the top and bottom hoses.
http://www.ebay.co.uk/itm/SUBARU-IMP...item41702e43d7
2 bolts on the slam panel and undo the top and bottom hoses.
http://www.ebay.co.uk/itm/SUBARU-IMP...item41702e43d7
If it's the rad, it's a piece of **** to replace it.
2 bolts on the slam panel and undo the top and bottom hoses.
http://www.ebay.co.uk/itm/SUBARU-IMP...item41702e43d7
2 bolts on the slam panel and undo the top and bottom hoses.
http://www.ebay.co.uk/itm/SUBARU-IMP...item41702e43d7
I was looking at this one
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=190571948943
I believe this will fit also
Looks right to me.
While it's out, Hammerite the new top and bottom fittings on the new one, held on by a bolt at either end.
Replace all bolts with stainless M6 x 25, especially those holding on the fan panel.
Hammerite the fan panel.
Replace the top hose and inspect the bottom hose.
And PLEASE do a search on how to refill without airlocking, since bleeding the system is impossible.
While it's out, Hammerite the new top and bottom fittings on the new one, held on by a bolt at either end.
Replace all bolts with stainless M6 x 25, especially those holding on the fan panel.
Hammerite the fan panel.
Replace the top hose and inspect the bottom hose.
And PLEASE do a search on how to refill without airlocking, since bleeding the system is impossible.
Looks right to me.
While it's out, Hammerite the new top and bottom fittings on the new one, held on by a bolt at either end.
Replace all bolts with stainless M6 x 25, especially those holding on the fan panel.
Hammerite the fan panel.
Replace the top hose and inspect the bottom hose.
And PLEASE do a search on how to refill without airlocking, since bleeding the system is impossible.
While it's out, Hammerite the new top and bottom fittings on the new one, held on by a bolt at either end.
Replace all bolts with stainless M6 x 25, especially those holding on the fan panel.
Hammerite the fan panel.
Replace the top hose and inspect the bottom hose.
And PLEASE do a search on how to refill without airlocking, since bleeding the system is impossible.
Will order all the stuff now
Thanks
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
Jul 17, 2016 10:43 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
