Rad leak
#1
Rad leak
Hi all
Noticed water dribbling under front drivers side of the car
Checked all hoses -all good
I have read that the main rad splits down the left?
How easy to fit a new one and best place for new one ?
Your help please
Cheers nick
Noticed water dribbling under front drivers side of the car
Checked all hoses -all good
I have read that the main rad splits down the left?
How easy to fit a new one and best place for new one ?
Your help please
Cheers nick
Last edited by nooswrx; 08 February 2013 at 06:06 PM.
#4
Unmapped 12.4s @ 105
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
If it's the rad, it's a piece of **** to replace it.
2 bolts on the slam panel and undo the top and bottom hoses.
http://www.ebay.co.uk/itm/SUBARU-IMP...item41702e43d7
2 bolts on the slam panel and undo the top and bottom hoses.
http://www.ebay.co.uk/itm/SUBARU-IMP...item41702e43d7
#5
If it's the rad, it's a piece of **** to replace it.
2 bolts on the slam panel and undo the top and bottom hoses.
http://www.ebay.co.uk/itm/SUBARU-IMP...item41702e43d7
2 bolts on the slam panel and undo the top and bottom hoses.
http://www.ebay.co.uk/itm/SUBARU-IMP...item41702e43d7
I was looking at this one
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=190571948943
I believe this will fit also
#6
Scooby Regular
iTrader: (2)
Looks right to me.
While it's out, Hammerite the new top and bottom fittings on the new one, held on by a bolt at either end.
Replace all bolts with stainless M6 x 25, especially those holding on the fan panel.
Hammerite the fan panel.
Replace the top hose and inspect the bottom hose.
And PLEASE do a search on how to refill without airlocking, since bleeding the system is impossible.
While it's out, Hammerite the new top and bottom fittings on the new one, held on by a bolt at either end.
Replace all bolts with stainless M6 x 25, especially those holding on the fan panel.
Hammerite the fan panel.
Replace the top hose and inspect the bottom hose.
And PLEASE do a search on how to refill without airlocking, since bleeding the system is impossible.
#7
Looks right to me.
While it's out, Hammerite the new top and bottom fittings on the new one, held on by a bolt at either end.
Replace all bolts with stainless M6 x 25, especially those holding on the fan panel.
Hammerite the fan panel.
Replace the top hose and inspect the bottom hose.
And PLEASE do a search on how to refill without airlocking, since bleeding the system is impossible.
While it's out, Hammerite the new top and bottom fittings on the new one, held on by a bolt at either end.
Replace all bolts with stainless M6 x 25, especially those holding on the fan panel.
Hammerite the fan panel.
Replace the top hose and inspect the bottom hose.
And PLEASE do a search on how to refill without airlocking, since bleeding the system is impossible.
Will order all the stuff now
Thanks
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM