Notices

coolent hose identification help, classic wrx,

Thread Tools
 
Search this Thread
 
Old 26 January 2013, 06:31 PM
  #1  
xcore
Scooby Regular
Thread Starter
 
xcore's Avatar
 
Join Date: Dec 2010
Posts: 114
Likes: 0
Received 0 Likes on 0 Posts
Default coolent hose identification help, classic wrx,

hi all, got a pin hole leak coming from a small black water hose right under the engine on the right hand side, just above the exhaust mani, not a large rad one, there seems to be a pair of black hoses (ones leaking) going into the block just above the headers. can you get these from a motorfactors or similar?

thanks

edit: goes into the side of the thermostat housing if that helps

Last edited by xcore; 26 January 2013 at 06:41 PM.
Old 27 January 2013, 12:33 AM
  #2  
merlin24
Scooby Regular
iTrader: (1)
 
merlin24's Avatar
 
Join Date: May 2006
Location: RM Performance
Posts: 3,032
Received 2 Likes on 2 Posts
Default

The coolant pipes come off the water pump,they connect (via metal pipes) to the header tank and to the heater matrix at the bulkhead.

Mick
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
KOEScoob
ScoobyNet General
6
17 September 2015 03:51 PM



Quick Reply: coolent hose identification help, classic wrx,



All times are GMT +1. The time now is 08:55 PM.