ecu identify please
#2
the reason why im asking is because i just purchased a 1998 subaru uk 2000.
i think the engine maybe a sti engine?
it has a td05 turbo
440cc injectors
fmic
full decat system
and the ecu as mentioned.
im trying to find out if this ecu is in fact a 96 to 98 sti ecu?
thankyou in advance
i think the engine maybe a sti engine?
it has a td05 turbo
440cc injectors
fmic
full decat system
and the ecu as mentioned.
im trying to find out if this ecu is in fact a 96 to 98 sti ecu?
thankyou in advance
#5
yes i already know that as per posting.what im trying to find out is whether or not it is the sti uk.As 2 are being sold on ebay identical to mine for sti.the seller is a ecu expert???? just need to verify with someone on hete that knows for sure.
#6
Scooby Regular
iTrader: (1)
There were no UK STIs in the GC8 (classic shape) the advertiser may put wrx or sti in the advert as this will make the advert show up more often when people are searching for replacement ecus.
Turbo has been changed on your car as I'm pretty sure you should have a TD04.
Turbo has been changed on your car as I'm pretty sure you should have a TD04.
Trending Topics
#8
Scooby Regular
As per your original post and MYBLACKWRX's reply the 8S ECU is from a standard UK 97/98 Turbo 2000 (destination code EK). It was also used in Australia for the equivalent model (destination code KA)
It was not used on any other models............
Given the mods I would check that it has an ESL daughterboard fitted to the ECU or similar.....................
http://www.enduringsolutions.com/
It was not used on any other models............
Given the mods I would check that it has an ESL daughterboard fitted to the ECU or similar.....................
http://www.enduringsolutions.com/
#9
exellent info,what ecu 3 plug is available that i could plug in which would be better then this standard 8s ecu.i purchased the car with these mods already on and to be honest dont know anything about scoobys.i have just purchased a full decat 3.5 inch system to put on and need as much help as possible with regards to ecu change.there are loads of ecus on ebay that are 3 pin plugs,just need to know what to go for?thankyou to all the replies so far
#10
Scooby Regular
I doubt if there is a standard ecu that you can swop that will besuitable for your current mods and those planned.
As above..........
Fit a daughter board and have it remapped to suit...........
As above..........
Given the mods I would check that it has an ESL daughterboard fitted to the ECU or similar.....................
http://www.enduringsolutions.com/
http://www.enduringsolutions.com/
Fit a daughter board and have it remapped to suit...........
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM