few niggles with my wrx 94
#1
Scooby Regular
Thread Starter
Join Date: Apr 2012
Location: wales
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
few niggles with my wrx 94
just today changed my coolant temp sensor for another as the fans were constantly on. i did however manage to break the wiring plug to it but the plug is on all the way- would this effect anything?
no change fans still on any ideas??
changed folding mirror switch and drivers one wasnt folding. also fitted another set of mirrors still didnt work.
no change any ideas??
thanks.
no change fans still on any ideas??
changed folding mirror switch and drivers one wasnt folding. also fitted another set of mirrors still didnt work.
no change any ideas??
thanks.
#3
Scooby Regular
iTrader: (13)
- Re. the fans... Did you recently do fault diagnosis with the plugs under the steering column? If so, did you put them back to non-diagnosis mode? If not, that's the reason why the fans are still going.
Or as above, the thermostatic switch is stuck in the closed circuit position.
- Mirror prob sound's like it could be a broken wire/dry joint long the wire from the motor to switch's connector - hence the reason why a different switch, itself, is not making a difference...
Or as above, the thermostatic switch is stuck in the closed circuit position.
- Mirror prob sound's like it could be a broken wire/dry joint long the wire from the motor to switch's connector - hence the reason why a different switch, itself, is not making a difference...
Last edited by joz8968; 08 September 2012 at 02:54 PM.
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
supshon
General Technical
2
03 October 2015 08:06 PM