Hi all. Having trouble finding anywhere that does lambda sensor for my96 wrx v limited. It's a Bosch A24-641 209. 3 wire one being red. Help
Please with which one will work properly and where to buy.
Thanks

 

Im having same issue mate but mines a 1999 uk 2000 impreza turbo o2 reading really high from the lambda in the turbo down pipe but theres loads to choose from? Lol

 

I got mine from a local motor factor for just under £50

Tbh the only question he asked me was if it was a three wire or two, and as far as I can see that's the only difference

He reckoned that they all had the same thread diameter, and the ONLY difference was 3 or 2 wires

 

http://www.lambdasensor.com/

Ive always managed to get everything i need from these guys. If its not listed call them with the o/e number and they will cross reference it

 

correct if you want a universal one. dependent on car make and model could have 2,3,4 or even 5 wires. normally the uni ones dont have a plug on them so require a little soldering

 

Ahh ok mate so that bosch ls002 universal 3 wire will fit in my turbo downpipe lambda hole? The one thats like 56quid? Also the 3 wires that are in my old sensor the 2 black and one white.... Are the wires on the new sensor coded so u know which wire goes where? Dont wana wire it up wrong way round etc lol

 

The one I got had the same coloured wires, but no plug

But I managed to use a small terminal screw driver and remove the wires from the old plug, the new ones then just push into place inside the old plug.

 

i have a brand new boxed Bosch LS02 in the house i no longer require, and yep the wires are the same colouring, 2 black & 1 white. and yep its the correct one for your car as i have an MY99 also. £30 delivered.

with the universal one you meant to cut plug of your old senor and fit onto new senor. or like steve-ex-vauxhall says you might get the plug on without any chopping of wires.

 

Mate pm me ur paypal address il deffo have that off ya lol :-) and thanks for the help :-D