whos got a scoobyclinic turbo?
08 July 2012, 07:26 AM
#1
Scooby Regular
Thread Starter
iTrader: (10)
Join Date: Aug 2007
Posts: 1,984
Likes: 0
Received 0 Likes
on
0 Posts
whos got a scoobyclinic turbo?
just a thread to see who has a scoobyclinic sc turbo and what power you have managed to extract from these epic turbos.please state which turbos,what car and what mods 
sc46 billet
p1
2.0 forged,syvecs,6 speed,fmic,flowed injectors,tubulars,fuel reg,3" vortex straight through,600bhp walbro,scoobyclinic bespoke caik.
mapped with 20% math by scoobyclinic
506.9 bhp
sc46 billet
p1
2.0 forged,syvecs,6 speed,fmic,flowed injectors,tubulars,fuel reg,3" vortex straight through,600bhp walbro,scoobyclinic bespoke caik.
mapped with 20% math by scoobyclinic
506.9 bhp
08 July 2012, 07:45 AM
#4
i have a blob sti 2.0
got the sc46,matched upipe,hybrid fmic, h and s 3.0 decat exhaust,tubular headers,walbro 255,fpr.reworked lateral injectors
all going on the car shortly.
going to be mapped with syvecs and running 20%meth doubt it will be anywhere near you bhp
got the sc46,matched upipe,hybrid fmic, h and s 3.0 decat exhaust,tubular headers,walbro 255,fpr.reworked lateral injectors
all going on the car shortly.
going to be mapped with syvecs and running 20%meth doubt it will be anywhere near you bhp
Last edited by tubbytommy; 08 July 2012 at 07:49 AM.
08 July 2012, 09:41 AM
#7
Scooby Regular
iTrader: (6)
Join Date: Oct 2010
Location: breaking 420 bhp high spec classic
Posts: 1,735
Likes: 0
Received 0 Likes
on
0 Posts
I also have a sc 46 billet on a 2.0 forged cross drooled nitrated crank lateral800 injectors Walbro 255 pump fmic reversed inlet and flipped inter cooler for shorter pipe less lag work 3inch system all the way thru 6speed conversion fuel reg parallel fuel lines braided fuel lines aps air inductin kit located in wing equal length headers and running on Simtec well alkatek not running yet it's nearly finished couple of weeks.. Then a running in map then full map going with straight vpower first then if not happy with that 20% meth so don't know what power it will be yet but should be fun in a classic !
Trending Topics
08 July 2012, 03:35 PM
#11
Scooby Regular
Thread Starter
iTrader: (10)
Join Date: Aug 2007
Posts: 1,984
Likes: 0
Received 0 Likes
on
0 Posts
i had a billet 20g pal but my sc46 kills it and for a biggish turbo isnt too laggy.my mate has an sc42 and that spools amazingly and makes great bhp too.win win
08 July 2012, 10:18 PM
#15
just a thread to see who has a scoobyclinic sc turbo and what power you have managed to extract from these epic turbos.please state which turbos,what car and what mods
sc46 billet
p1
2.0 forged,syvecs,6 speed,fmic,flowed injectors,tubulars,fuel reg,3" vortex straight through,600bhp walbro,scoobyclinic bespoke caik.
mapped with 20% math by scoobyclinic
506.9 bhp
sc46 billet
p1
2.0 forged,syvecs,6 speed,fmic,flowed injectors,tubulars,fuel reg,3" vortex straight through,600bhp walbro,scoobyclinic bespoke caik.
mapped with 20% math by scoobyclinic
506.9 bhp
09 July 2012, 03:40 AM
#18
Scooby Regular
iTrader: (1)
Join Date: Feb 2011
Location: Pizzaland
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Gt30billet rotated rcm kit,block is 2.5,stage3 cosworth heads and cams.cosworth billet crank,6speed,vpower made 504bhp,on 1.6 bar boost,,,,it's quick real fun to drive boost is there when u need it
09 July 2012, 02:26 PM
#25
Scooby Regular
Join Date: Oct 2011
Location: Cardiff
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
I have a SC42 fitted on a 2.0 lt which was mapped at scooby clinic and it made 401bhp, 1.45 bar boost, ecutek, quite pleased as I am still on a top mount and a cat in the down pipe, was on pump gas V power.
10 July 2012, 02:02 PM
#27
I'm considering an SC42 (currently MD321H) and have a pretty good list of supporting mods so I would be aiming for 420
JohnD