link g1 ecu my99 problem
01 July 2012, 09:48 PM
#1
Scooby Newbie
Thread Starter
Join Date: Jun 2012
Location: swiss
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
link g1 ecu my99 problem
hy guys
sorry my english is bad, but i need help
i have a my99 GT (europe model) with link ecu
the engine will not start with the ecu !
- no rpm signal in logger menu (crank and cam sensor checked => pins change to ecu => not help
- fuelpump will start on stage 2 ignition, but not on starting position
- no spark on plug, ignition coil checked to ecu ok !
- immobilizer 1 and 4 off and 2 and 3 on (i have a immobilizer)
could anyone have an idea what the problem
regards markus
sorry my english is bad, but i need help
i have a my99 GT (europe model) with link ecu
the engine will not start with the ecu !
- no rpm signal in logger menu (crank and cam sensor checked => pins change to ecu => not help
- fuelpump will start on stage 2 ignition, but not on starting position
- no spark on plug, ignition coil checked to ecu ok !
- immobilizer 1 and 4 off and 2 and 3 on (i have a immobilizer)
could anyone have an idea what the problem
regards markus
01 July 2012, 10:12 PM
#2
Scooby Regular
iTrader: (2)
Join Date: Nov 2000
Location: Norup, Denmark
Posts: 936
Likes: 0
Received 0 Likes
on
0 Posts
The add on trigger board in the ecu can be defect, or the connection to it
If it not just a case of wet plugs that are now destroyed from trying to start
/Skassa
If it not just a case of wet plugs that are now destroyed from trying to start
/Skassa
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM
