scooby if in doubt....

I've got a wrx blob eye, with different headers, cats taken out remap etc... And I got the engine management light turned out as no cats, drove about 100mile and now have this code up, can any 1 help please

jura11

iTrader: (7)

Hi there

Have look at this guide how to get rid this CEL P0546(Exhaust Gas Temperature Sensor Circuit Malfunction (High Input) )

http://www.scoobypedia.co.uk/index.p...chanicalCELFix

http://www.fastwrx.com/p0exgastesec.html


But I would contact your mapper which can turn off this code easily






Jura

scooby if in doubt....

Thanks for the help, next question is..
Is it ok to drive to my mapper which is about 50mile?

scooby if in doubt....

Any 1 know if it's ok to drive 50 mile????

Don Clark

Have you de-catted your up pipe?

If so did you refit the EGT sensor?

If not that is the reason for the CEL

Can be cleared by fitting a 2.2K ohm resistor at the plug.........

http://www.clubwrx.net/forums/engine...istor-mod.html

Midlife......

iTrader: (2)

I drove around for about 2 years with the CEL light on because I removed the EGT sensor and the resistor fix was hit and miss. Racedynamix turned it off in 10 mins

Shaun

scooby if in doubt....

Yea de-catted the up pipe, and I refitted the EGT sensor.