BaojeeX

Hoping someone can shed some light on this. The CEL isn't showing on my Blobeye GX Sport, it has a full cobra decat system with unequal headers. It doesn't even show on ignition switch as the others lights on the dash show. So I'm guessing the previous owner has taken the bulb out.

Was told to check this by a fellow member on another forum I'm on. So has the bulb been taken out, don't have a OBD to check.

stualex

iTrader: (3)

Assuming you've checked all the bulbs then shine a torch through those 2 holes which don't have bulb holders in, you should see it light up on the other side.

tubbytommy

iTrader: (20)

there is two bulbs missing in the picture, as said above shine a light through nad you will see what the bulbs should illuminate

Scoobyno1

iTrader: (22)

The cel light is an led soldered to the board and is not changeable afaik. You need to split the cluster to see if the led is still there?