Coolant questions
13 June 2012, 02:26 PM
#1
Scooby Regular
Thread Starter
iTrader: (17)
Join Date: Nov 2011
Location: London
Posts: 1,425
Likes: 0
Received 0 Likes
on
0 Posts
Coolant questions
Hi Guys,
I changed my coolant with Subaru's pre-mixed coolant, and had some work done where the mechanic drained the coolant to carry the work out, and re-filled with his own (red) coolant.
I was going to buy the subaru coolant again to make sure its getting the stuff it should be, but its a little steep.
I'm wondering what most people with new age wrx's running 350bhp are using? Or what is recommended?
Cheers guys!
I changed my coolant with Subaru's pre-mixed coolant, and had some work done where the mechanic drained the coolant to carry the work out, and re-filled with his own (red) coolant.
I was going to buy the subaru coolant again to make sure its getting the stuff it should be, but its a little steep.
I'm wondering what most people with new age wrx's running 350bhp are using? Or what is recommended?
Cheers guys!
Last edited by Reshard1977; 13 June 2012 at 02:27 PM. Reason: corrected typo
13 June 2012, 03:57 PM
#2
You can't mix types, but you are OK with different COLOURS andf BRANDS, so long as it's the same type.
If in doubt, ask a decent motor factor for an antifreeze suitable for an alloy engine and with anti-corrosion properties. Then drain and refill with that stuff.
Most is sold to dilute, dilute it 50/50.
If in doubt, ask a decent motor factor for an antifreeze suitable for an alloy engine and with anti-corrosion properties. Then drain and refill with that stuff.
Most is sold to dilute, dilute it 50/50.
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM