Coolant questions
 

Hi Guys,

I changed my coolant with Subaru's pre-mixed coolant, and had some work done where the mechanic drained the coolant to carry the work out, and re-filled with his own (red) coolant.

I was going to buy the subaru coolant again to make sure its getting the stuff it should be, but its a little steep.

I'm wondering what most people with new age wrx's running 350bhp are using? Or what is recommended?


Cheers guys! :thumb:

You can't mix types, but you are OK with different COLOURS andf BRANDS, so long as it's the same type.

If in doubt, ask a decent motor factor for an antifreeze suitable for an alloy engine and with anti-corrosion properties. Then drain and refill with that stuff.

Most is sold to dilute, dilute it 50/50.