Factory Boost REading Help!!!
#1
Guys,
I just installed a Autometer 3301 boost gauge.
Having a few problems with the readings.
MY02 Wagon
19Hg Vacuum at Idle.
25Hg Vacuum on decel
Max boost reached in 1st gear is 9psi
Max boost reached in 2nd gear is around 12psi
Max boost in all other gears is around 13psi.
Can anyone please sanctify these readings
The car is bone stock.
I've connected my plumbing into the nipple right next to the +ve wire that joins to the alternator witht eh REd cover cap.
I figured I should be getting higher reading than this?
Have I got a leak in the plumbing? If so how do I test it.
See picture for tap point its the circled one!
http://www.i-club.com/forums/attachment.php?s=&postid=1892268
Thanks in advance,
Antony
I just installed a Autometer 3301 boost gauge.
Having a few problems with the readings.
MY02 Wagon
19Hg Vacuum at Idle.
25Hg Vacuum on decel
Max boost reached in 1st gear is 9psi
Max boost reached in 2nd gear is around 12psi
Max boost in all other gears is around 13psi.
Can anyone please sanctify these readings
The car is bone stock.
I've connected my plumbing into the nipple right next to the +ve wire that joins to the alternator witht eh REd cover cap.
I figured I should be getting higher reading than this?
Have I got a leak in the plumbing? If so how do I test it.
See picture for tap point its the circled one!
http://www.i-club.com/forums/attachment.php?s=&postid=1892268
Thanks in advance,
Antony
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM