HDI Hybrid FMIC pipe work on a Spec C
#1
HDI Hybrid FMIC pipe work on a Spec C
Just a couple of queries about adding a FMIC to my v.8 53 plate Speccie...
Will a FMIC alter the effectiveness of the oil cooler? or mess with any oil temp sensors due to the intercooler core being in front of it?
Where does the drivers side top pipe go to meet the intercooler core? Is it through the wing? If so how would i fit a cold air Kit in the wing too? Any cutting required?
Thanks in advance
Andrew
P.S does anyone one have a fittting guide for the above kit that could be emailed?
Will a FMIC alter the effectiveness of the oil cooler? or mess with any oil temp sensors due to the intercooler core being in front of it?
Where does the drivers side top pipe go to meet the intercooler core? Is it through the wing? If so how would i fit a cold air Kit in the wing too? Any cutting required?
Thanks in advance
Andrew
P.S does anyone one have a fittting guide for the above kit that could be emailed?
#2
Scooby Regular
iTrader: (2)
Join Date: Mar 2009
Location: Lincs
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
I have not had any issues with high oil temps since fitting my HDi front mount.
The drivers side does go through the wing, which makes fitting the cold air kit filter a bit tight but you just need to get the right size filter. The only cutting required is the front bumper to accomodate the intercooler.
I have a fitting guide in PDF format that I can email over to you, I will PM you my email address.
Arthur
The drivers side does go through the wing, which makes fitting the cold air kit filter a bit tight but you just need to get the right size filter. The only cutting required is the front bumper to accomodate the intercooler.
I have a fitting guide in PDF format that I can email over to you, I will PM you my email address.
Arthur
#3
Scooby Regular
iTrader: (17)
Join Date: Nov 2011
Location: London
Posts: 1,425
Likes: 0
Received 0 Likes
on
0 Posts
I have not had any issues with high oil temps since fitting my HDi front mount.
The drivers side does go through the wing, which makes fitting the cold air kit filter a bit tight but you just need to get the right size filter. The only cutting required is the front bumper to accomodate the intercooler.
I have a fitting guide in PDF format that I can email over to you, I will PM you my email address.
Arthur
The drivers side does go through the wing, which makes fitting the cold air kit filter a bit tight but you just need to get the right size filter. The only cutting required is the front bumper to accomodate the intercooler.
I have a fitting guide in PDF format that I can email over to you, I will PM you my email address.
Arthur
But, Arthur, could you email me the PDF too please.
I have a bugeye WRX, and on all the pics of FMIC on bugs, i've seen a pipe that goes over the top on passenger side and down the front, where my expansion tank is. How does everyone get round this? re-locate the expansion tank to where?
#4
I have not had any issues with high oil temps since fitting my HDi front mount.
The drivers side does go through the wing, which makes fitting the cold air kit filter a bit tight but you just need to get the right size filter. The only cutting required is the front bumper to accomodate the intercooler.
I have a fitting guide in PDF format that I can email over to you, I will PM you my email address.
Arthur
The drivers side does go through the wing, which makes fitting the cold air kit filter a bit tight but you just need to get the right size filter. The only cutting required is the front bumper to accomodate the intercooler.
I have a fitting guide in PDF format that I can email over to you, I will PM you my email address.
Arthur
#5
Scooby Regular
iTrader: (2)
Join Date: Mar 2009
Location: Lincs
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to hijack the thread,
But, Arthur, could you email me the PDF too please.
I have a bugeye WRX, and on all the pics of FMIC on bugs, i've seen a pipe that goes over the top on passenger side and down the front, where my expansion tank is. How does everyone get round this? re-locate the expansion tank to where?
But, Arthur, could you email me the PDF too please.
I have a bugeye WRX, and on all the pics of FMIC on bugs, i've seen a pipe that goes over the top on passenger side and down the front, where my expansion tank is. How does everyone get round this? re-locate the expansion tank to where?
Yeah, no problem, send me over your email address and I will send it to you.
Arthur
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM