crazyspeedfreakz

iTrader: (92)

Hi there people ...

Just after abit of advice on a turbo change really ... Basically what I was wondering is, Im taking off my vf28 on my v5 to be replaced with another vf28, now I no when I remove the bottom coolant hose from the turbo I'm gonna lose a reasonable amount of coolant Is there anyway I can just top up or do I have to do a full coolant change ( remove bottom hose from rad ) and start again.

Many thanks

DonNedly

iTrader: (10)

just clamp the coolant hoses and you will hardly lose any at all.

crazyspeedfreakz

iTrader: (92)

Too late the turbo is already off ... do I now have to completely re do the whole System ?

DonNedly

iTrader: (10)

no you just got to replace the coolant you lost.

crazyspeedfreakz

iTrader: (92)

Do u happen to no where the best place to fill
From to replace the lost fluid I mean do just
Put a funnel on the bottom turbo hose.

Bit confused I can do a full Coolant change just
Never refilled only part of the system b4

DT-SPD

iTrader: (7)

just add it to the coolant tank, the same as when you did a complete coolant change just you wont need to add quite so much

crazyspeedfreakz

iTrader: (92)

Thanks seems to have Done the job