aaron_ions

Hi all after fitting new parts to my car you have told me it needs to be remapped so i am after names and contact details of people who can come and set my car up im in birmingham. The cars a uk turbo 2000 x reg classic ive fitted intercooler induction kit and decat syste, and its running lumpy u guys have said not to run until its mapped so Any info in right direction would be grand! Thanks

TonyBurns

iTrader: (3)

Is that a front mounted intercooler you have fitted?
The induction kit could (and mainly do) cause issues with the maf sensor, it can be sorted out with a remap but the maf sensors are very fragile in the MY99/00 cars and prefer the standard air intake (which wont be possible with a fmic).
Remap is a must if you want to keep your engine from killing itself.

Tony

AN07 PTN

give Duncan raceDYNAMIX a ring on 07540185754 he comes to u

Bristol98

Duncan (RaceDynamix), top geezer! Mapped my MY00 STi 6....

Tidgy

loads of places around mids area, pat herbon is prob best mapper in the country and maps at API which isn;t a million miles away from brum

AN07 PTN

never heard of him.... thats not to say he is not good like..

Shaks-STI

iTrader: (7)

Duncan is the man, i am going to see him at RCM today after work.

Modifications

iTrader: (6)

Ducan did mine at weekend for the second time +1 for Duncan

APIDavid

iTrader: (4)

A strong vote for Pat Herborn, he is our and 'Clinic's mapper of choice. Others pale into significance beside him........................

Tidgy

lot, you;d be amazed how many don't know his name but know who he is, ever heard of syvecs?

aaron_ions

Well thats the reason ive had to go for an induction kit cos of the fmic, i bought a nice upgraded panel filter to go in the airbox until i seen were the fmic pipes routed lol so got a cone on there now! So the maf could be broken or just malfunctioning due to needing mapping... Should i get a spare just incase before i get a mapper out. Thanks for that number for duncan will try him!

WildPikey

Same reason I had to go for an Induction kit, Mine was mapped with just an uprated panel filter which I would of been happy to keep, Since fitting the front mount, filter and bov it is definately not happy but that was to be expected, the maf readings on my apexi hand controller are all over the place where as they used to be quite stable/consistent, I'm confident it's just a case of needing the map tweaked which I'm getting done asap, Your probably just experiencing a similar issue to me, either way you wouldn't really notice the benefit from your recent mods until mapped so definately worth while

aaron_ions

Righteo thanks. Just as a rough guide so i know what to expect lol how much do these mapping services roughly cost as this is first remap on this car thank you guys

AN07 PTN

if duncan is mapping
its 350 for first map on the road normaly 400 if on rolling road.
around the 100-150 mark for map tweaks after first map



BARGAIIIIIIIIIN

aaron_ions

Nice 1. And you rekon he can put the boost up on the road too whilst doing that first map then cos if he can may as well do that too as its running the standard boost. Obv will need a 3 port boost control for that wont i. Thanks

AN07 PTN

speak to duncan.. not sure u will need a 3port but if you do he can suply and fit before the map. i think you will find whatever you have fitted to your car he will map it so everything works to its full potential and yes boost can be increased

APIDavid

iTrader: (4)

Pearls before swine, tidg

aaron_ions

Thanks for all your help guys cant wait to get it done!

Tidgy

RICHARD J

iTrader: (4)

Bob Rawle. He's mobile too & highly respected.