jeffwrx

iTrader: (50)

Hi all ,

i have a 05 sti type uk, looking at getting a new turbo + remap,
have seen this td05 20g twin scroll , would this work well on my car? or am i better of just using a normal 20g?
is twin scroll much better?

i know i would have to change the headers, sump, and downpipe ,

thanks.


http://www.ebay.co.uk/itm/Kinugawa-T...ht_2176wt_1139

Billet

iTrader: (60)

Best to stay away from ebay turbos mate.
If i were you i'd go with a second hand MD321H. Works very well on a newage STI and is a tried and tested turbo. Not cheap, second hand anywhere between 700 and 900 pound. But it is a fit and forget turbo. ebay ones tend to blow up a lot.

barnshaw

iTrader: (1)

more to the point your car is not a twinscroll so it would not fit

Billet

iTrader: (60)

He says he is willing to convert it.

barnshaw

iTrader: (1)

sorry didnt see that bit, also the kinguawa ones are not the same as the very cheap ebay copies, kinguawa are actually not too bad a make.

stedee

iTrader: (4)

imo i wouldnt bother, i have heard bad things specifically fitting of them, flanges are uneven/not flat , actuator in the wrong place, this was from a good source iirc

never heard of a 20g twinscroll either before this

jeffwrx

iTrader: (50)

thanks for reply's ,

have no problem with buying from kinguawa have bought from them a few times now with no problems,

was just a idea really, if i can find a MD321H or something similar at a reasonable price i would go with that,

just interested to know if it is worth converting to twin scroll really