Wastegate / actuator / downpipe / remap question
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jun 2010
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Wastegate / actuator / downpipe / remap question
I'm trying to make my type-r a little less laggy ref this thread:
https://www.scoobynet.com/general-te...on-type-r.html
Upon removing the my old downpipe I thought I'd better check the wastegate flap is proper sealed (advice from Simon & Harvey) and there's movement of 1-2mm which I'm guessing is contributing to my late boost.
Ive got a forge actuator on it so is it a case of winding it in until there's no play on the flap? (I won't go mad)
Will my power fc need a remap going from my original downpipe (pic in thread, slightly bellmouthed not divorced) to a full on big bellmouth and possibly winding the actuator in a turn or two?
Many thanks
https://www.scoobynet.com/general-te...on-type-r.html
Upon removing the my old downpipe I thought I'd better check the wastegate flap is proper sealed (advice from Simon & Harvey) and there's movement of 1-2mm which I'm guessing is contributing to my late boost.
Ive got a forge actuator on it so is it a case of winding it in until there's no play on the flap? (I won't go mad)
Will my power fc need a remap going from my original downpipe (pic in thread, slightly bellmouthed not divorced) to a full on big bellmouth and possibly winding the actuator in a turn or two?
Many thanks
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM