Speedo not working
#1
Scooby Regular
Thread Starter
Join Date: Jun 2011
Location: west sussex
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Speedo not working
Hi peeps have a problem with my spedo not working properly it's just jumping around and not giving me a accurate speed measure it's a ver 2 wrx any one know what's causing this and how I can fix it ?
Thanks
Thanks
#2
Could be a couple of things but most likely is the cable.
1stly,the cable is in 2 parts, so it could be the smaller part that 1st goes into the gearbox, then it joins the longer cable that feeds the dials.
so,check the speedo cable in the engine bay, you cant miss it really, follow it down from the bulkhead.
if you have a speedo converotr this could also be at fault, but its either in the speedo cable or behind the dials.
but start simpl and check the cable, you will need to remove it from the gearbox,you can hook it upto a drill and spin it up and see if its ok etc
it could be the gearbox drive gear, but thats a last resort LOL
good luck
1stly,the cable is in 2 parts, so it could be the smaller part that 1st goes into the gearbox, then it joins the longer cable that feeds the dials.
so,check the speedo cable in the engine bay, you cant miss it really, follow it down from the bulkhead.
if you have a speedo converotr this could also be at fault, but its either in the speedo cable or behind the dials.
but start simpl and check the cable, you will need to remove it from the gearbox,you can hook it upto a drill and spin it up and see if its ok etc
it could be the gearbox drive gear, but thats a last resort LOL
good luck
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM