nizmo80

iTrader: (2)

hi

i have a gc8 98 v4 wrx sti with the mid level spoiler.
i have just bought a high level spoiler from a guy on scoobynet
it looks like a p1 spoiler.
and i am just wanting to know exactly how to fit it.
when i lift my bootlid i see 2 bolts.
will i need to drill two extra holes to the bootlid to fit the spoiler when it arrives.
also does anyone have pictures they could post of the underside
of there bootlid so i can see what they have had to do to fit the spoiler.
any info or instructions would be appreciated


thanks again lads

ronjeramy

iTrader: (1)

If I remember right it "should" use the same holes, just bond it on with loads of tiger seal as well.

r1c

iTrader: (9)

Is it genuine? My aftermarket one needed holes drilling, was ok tho just mark it out carefully

scoobiepaul

I made a cardboard template on my v 7 bugeye, think I had to drill 6 extra holes.

ironbridge

iTrader: (3)

You will need to drill extra holes. I changed from a V4 to a V5 spoiler and needed to drill several extra holes.

alcazar

iTrader: (2)

For a start there are THREE bolts per side on the 98 cars, there are two more under the rubber bumpstops

You MAY find it holds on OK with six bolts, but I would bond it too.

Remember that the least you must do is put non-setting mastic around all holes, bolt and wiring, before placing the spoiler.

This stuff is good: http://www.ebay.co.uk/itm/CARAVAN-SE...item43ab1910b9

And take into account that if you bond it, it's not coming off again, should you need it to. Your choice.

99jdee

i only have 2 bolts on my p1 replica on my classic, hope my spoiler doesnt fly off! lol

nizmo80

iTrader: (2)

thank guys

the guy i am buying the spoiler said today it has two bolts on either side
so it is the same spoiler as your one 99jdee.
so yea i will be puting plenty of mastic on aswell.lol
cheers for telling me about the bolts under the bumpstops alcazar i probibly would of not spotted that one when i go to fit my spoiler.
i was wondering why i only seen one bolt for the spoiler.lol
do the bumpstops pull off or screw off mate?

as allways thanks very much for all your help

alcazar

iTrader: (2)

Push them sideways at the top, they spring out like rubber grommets.

nizmo80

iTrader: (2)

cheers mate